Home  >  Packaging Machinery  >  Packaging Forming Machines

Pressure forming machine,Vacuum forming machine, Trimming Machine, Non standard thick sheet vacuum thermoforming machine 2013NEW - details see: https://www.machineto.com/pressure-forming-machine-10060333

Pressure forming machine

automatic vacuum machine, automatic pressure forming machine , thermo forming machine

Vacuum forming machine, Pressure forming machine, Trimming Machine, Non standard thick sheet vacuum thermoforming machine , Punching Mould , Forming Mould

Model No: NS-38,38SA,38PP,

NSS-58, NSS-58L,

NSPF-65,68,78,98,

TP-65-7, HP-65-7, TP-68-7,HP-68-7

NST - Series

Punching Mould

Forming Mould

Product Introduction:

1) Feeding chain coated with hard Chromium.

2) Minimize heat lost by oven covering.

3)Control system memory sufficient for 100 sets mould

parameters. Extended memory storage by CF card.

4)Easy mould changes: less than 15 minutes.

5)CE safety specification.

Benefits:

1) User friendly: Direct control through touch screen panel.

2) Co-operate with pneumatic cylinder as plug assist for NS series.

3) High speed for mass production.

4) High reproducibility.

5) Less labor cost by automation.

6) Systematic data record of QC and mould parameters.

7) Light barrier for safety operation.

Added Services:

1) Free consultation of production process.

2) Mould design.

3) Machine on site regular check and calibration.

4) Flexible package of complete production line: chiller(2Hp for feeding,8Hp for mould cooling), vacuum pump, extrusion and so on .

Main components :

Monitor panel	WeinView 10.4"color display touch screen
PLC system	Panasonic
AC servo motor and control	Yaskawa or Sanyo Denki
Low voltage devices	Schneider
Heating system	Infra red heater
Pneumatic devices	SMC or Taiwan AirTac
Vacuum pump	Korea Blete
Chiller	Hong Kong Nitsu
Water cooled mold base 18",20",22",24",26" and 28"	Either one of the sizes.
Water sprayer	Japan Meiji,8 pcs

Technical Data :

Model	NSS-58	NSS-58L
Drive by AC servo motor	Vacuum forming	Vacuum forming
Feeding drive	AC servo motor	AC servo motor
Forming area mm	1120X760 mm	1220*760 mm
Depth of draw, positive max	200 mm	200 mm
negative max	200 mm	200 mm
Material width mm	510-810 mm	510-810 mm
Material thickness mm	0.15-1.5 mm	0.15-1.5 mm
Feeding speed	100-1500mm/sec	100-1500mm/sec
Insulating plate drive	AC servo motor	AC servo motor
upper & lower table drives	AC servo motor	AC servo motor
Heating	Single zone upper & lower oven	Single zone upper & lower oven
Air consumption at 6 bar supply	181 L/cycle	194L/cycle
Number of cycles	15cyc/min	15 cyc/min
Control system	PLC + 10.4" colour touch screen	PLC + 10.4" colour touch screen
Total connected load	94.05 kw	105.97 kw
Power supply	220/380/415V,3phase	220/380/415V,3phase
Machine dimension LxWxH mm	7500*2300*2600 mm	8100*2300*2600 mm
Weight of machine kg	3500 kg	4000 kg

Model	NSPF-78	NSPF-98
Drive by AC servo motor	Pressure forming	Pressure forming
Feeding drive	AC servo motor	AC servo motor
Forming area mm	760*600 mm	760*600 mm
Depth of draw, positive max	120 mm	120 mm
negative max	120 mm	120 mm
Material width mm	250-810 mm	250-810 mm
Material thickness mm	0.18-2.0 mm	0.18-2.0 mm
Feeding speed	100-1500mm/sec	100-1500mm/sec
Upper/lower table drives	AC servo motor	AC servo motor
Heating	Three zone upper & lower oven	Three zone upper & lower oven
Forming pressure,max.	5 bar	5 bar
Number of cycles	40 cyc/min	40 cyc/min
Control system	PLC + 15" colour touch panel	PLC + 15" colour touch panel
Air consumption at 6 bar supply	353L/cycle	353L/cycle
On-line auxiliary station	Trimming+ Stacking+ Count	Hole punching+ Trimming + Stacking + Count
Off-line auxiliary(option)	Nil	Nil
Total connected load	151.5 kw	181.5 kw
Power supply	220/380/415,3phase	220/380/415,3phase
Machine dimension LxWxH mm	12850X2600X3140 mm	14540X2600X3140 mm
Weight of machine kg	13000 kg	16000 kg

About US:

Application:

(1) Excellent for mass production blister of food packaging such as fruit, cake and biscuit. Bakery products, snack, meal and so on.

(2) packaging of toys, stationery, kitchen wares and so on.

(3) Higher quality blister with certain quantity such as electronic parts tray, tool package, appliance, cosmetic and so on.