press

Press, Multi operating station press, leaf spring machine, 4 operating station, 3 station, 2 station, 160t,200t,250t - details see: https://www.machineto.com/press-10133032

Condition:New	CNC or Not:CNC	Power Source:Hydraulic	Place of Origin:Shandong China (Mainland)
Brand Name:SDGT	Model Number:4 station,2 station,3 station	Voltage:220V, 440V	After-sales Service Provided:Engineers available to service machinery overseas

press/leaf spring machine

4 operating station press

The 4 operating station press isused for drilling center hole, end cutting, side cutting, end formingand some other use. It is equipped with one or two oil pumps. We also have 2 station or 3 station press according to different requirement.

Main specialties

type	4 station press
Number of stations of the equipment	Four stations
Size of the upper working table	520 mm (left to right): 460mm (front to back)
Size of the low working table	620 mm (left to right): 65mm (front to back)
Size of model hand hole	70*70mm
Stroke of the oil cylinder	about 300mm
Height of the working table	600mm
Guidance of the upper and low movement of the oil cylinder	directed by slide block
Size of dropping hole of the low working table	180mm
Height of open die	800mm
Height of close die	500mm
Idle load speed	more than 15mm/s

Characteristic:

1. The oil cylinder can be operated manually or automatically.

2. Electro-hydraulic change-over valve, speed regulating throttle valve and overflow valve are all made by Beijing Huade.

3.The pipes are connected through flanges.

4. Each station of the low working table is installed separately. Installation late is arranged below the low working table and they are spigot mated. They are connected with bolts, whose size is M24, 6 bolts per station.

5. Water cooling device is arranged at the upper press head.

6. Work pieces are unloaded at the back of the working table.

7. Electric control system is controlled with PCL