Precast Hollow Core Slab Forming Machine

Precast Hollow Core Slab Forming Machine, 1.smooth surface,strong strength, 2.fast moulding speed 1.2-1.4m/min - details see: https://www.machineto.com/precast-hollow-core-slab-forming-machine-10076704

Condition:New	Production Capacity:1.4m/min	Place of Origin:Shandong China (Mainland)	Brand Name:HAIYU
Model Number:TW	Weight:1500KGS	Certification:CE,ISO	Warranty:1 year
After-sales Service Provided:Overseas service center available	Type:Hollow Core Roof Slab Making Machine	Processing:Brick Molding Machine	Brick Raw Material:Cement,stone,sand
Automatic:Yes	Capacity:1.4m/min	Power:4KW	Extrusion Machine:Hollow Core Slab Machinery

Precast hollow core slab forming machine

1.smooth surface,strong strength
2.fast moulding speed 1.2-1.4m/min
3.easy to maitain and repair

Precast concrete slab machine

1.Introduction:

This pushing type prestressed concrete forming machine applies the technology of pushing long line to producehollow core or solid floor slabsconsecutively. The length can be cut as per the special construction design. With low labor force, high efficiency, neat appearance,accurate dimension and high intensity, the products satisfied the related technical requirements.

2.Technical parameters:

Hollow Core Concrete slab Machine	Motor Power (kw)	Vibrator power (kw)	Weight (kg)	Forming speed (m/min)	Holes no.	Dia. Of holes
TW90X600	4.0	2.2	955	1.2-1.4	6	Φ50
TW100X600	4.0	2.2	975	1.2-1.4	6	Φ60
TW120X600	5.5	3.0	1050	1.2-1.4	5	Φ76
TW120X900	7.5	3.0	1580	1.2-1.4	8	Φ76
TW120X1200	7.5	3.0	1650	1.2-1.4	11	Φ76
TW150x600	5.5	3.0	1400	1.2-1.4	4	Φ105
TW150x900	7.5	3.0	2100	1.2-1.4	6	Φ105
TW180x600	7.5	3.0	1290	1.2-1.4	3	Φ135
TW180x900	7.5	3.0	1900	1.2-1.4	5	Φ135

3.Machine Maintenance:

1)To clean the residual concrete on the key parts, such as the bottom of the vibration, the bottom of the planishing panel, dabber, side moudling board, vibration four corners everyday.

2)To add lubricant. Note: no lubricant add to the rubber washer.

3)If the machine works for three monthes (working time), the speed reducer should be cleaned and lubricated. Also, it is also need to change the lubricant for the machine with less than three real work monthes every two year.

4)To check the engine oil volume regularly.

5)The oil of the speed reducer is 20# gear compound but not other oil.

6)To check all the fasteners every shift.

7)To change the parts of the forming machine in time. For example, the tooling sunks for 2-3mm.

8)The deviation of the vibration foot cap and the central of vibration upright is beyond 5mm, please change rubber on time

Prestressed concrete hollow core slab forming machine