Home  >  Construction Machinery  >  Building Material Machinery  >  Board Making Machinery

1,simple&convenient, 2,easy to operate, 3,best hollow core slab machine, 4,less energy consumption - details see: https://www.machineto.com/precast-concrete-hollow-core-slab-machine-10075166

precast concrete hollow core slab machine

1,simple&convenient
2,easy to operate
3,best precast hollow core concrete floor slab forming machine

4,less energy consumption

5,fast molding speed1.2-1.4m/min
6,best concrete component with top technique
7,strong weght capacity

8,long service life

9,only 2 to 4 workers needed during the whole production

description

10,concrete hollow core slab machine which is produced in our company

isnow the best concrete components with top technique in China.

11,The concrete slabs can be used as the floor in the buildings. They

are stout with many steels inside.

12,The forming principle makes the machine easy to control and maintain.

The precast concrete hollow core slab machineis the production floor of a construction machine: simple and convenient; easy to operate; environment protection and energy; durable; stability. Prestressed concrete stair machine stair steppers pedestal in precast production, the company is under construction and modernization needs of economic development, on the basis of the handmade developed a prestressed concrete. The mechanism of cement products are mainly used for walking stairs, compared with the traditional arts and crafts, work efficiency increased by 15 to 20 times, simple operation and easy maintenance.

Precast concrete hollow core slab machine has advantages:

First, hollow core slab machine with cast iron girders (formerly channel steel girders),

the machine never deformed, thus ensuring the stability and service life of the machine.

Second, the gearbox has been specially designed gears and bearings with the gap can be

adjusted to avoid prolonged use of bearing damage gear and gearbox.

Third, hollow core slab machine each mixing blade center distance between the original design of 103 mm and 107 mm, so that dosing is more reasonable and less prone floral corner crack phenomenon, so forming a better and longer mixing blade life.

Safe methods of operation for concrete hollow core slab making machine:

Hard concrete slab machine selects the outputs of the floor should immediately sprinkle with a spray bottle in the water again, back cover with a high water content in the floor being totally covered to reduce water evaporation, prevent chapped angry. Reminder: there must be someone to take it seriously, and never can be ignored.

Precast hollow core concrete floor slab machineis about to reach reinforced terminal, sit machinehead, material clean, back filled with sand hopper starts electromechanical, I will feed hopper cleaning before exchange position.

Model	YNL-120A-500/600
Motor model	YNL-120A
Power	4kw
Voltage	380v
Vibration frequency	2160±60n/min
Maximum no-load amplitude	7.10±0.5mm
Minimum no-load amplitude	5.9±0.5mm
No-load vibration acceleration	28±4m/s2
Full of vibration acceleration	9.0±1m/s2
The vibration intensity of in front and back	same
Vice-tendon position accuracy of 500 and 600 model	same