Home  >  Related Services  >  Machinery Processing Services

ABC Glazed tile roll forming machine Glazed tile roll forming machine, stable , strong , and good design - details see: https://www.machineto.com/pre-engineered-structure-forming-machine-10368780

INTRODUCTION

LMS roll forming machine which takes the COPRA, designing software for cold rolling production and applies for the first step of rolling design, calculation, molding technique simulation, blueprint optimization and roller design to rough molding management, digital machining and quality control. LMS applies for the COPRA in the whole process. The greatness of COPRA is combined with LMS's great experience of twenty years completely and this make LMS be with might double in production for clients. Realize your dream with CORPA.

STEP TILE ROOF ROLL FORMING MACHINE TR27-192-960
(1) Suitable Material: Al;Zinc steel
(2) Material Width: 1'250 mm
(3) Material Thickness: 0.30 - 0.70 mm
(4) Profile Width:960 mm
(5) Profile Height: 27 mm
(6) Profile: please refer the attached profile drawing.

Production Process:
Manual decoiler -guiding feeding - manual shearing -- roll forming - step forming - hydraulic cut-off after sizing -- final product.

One complete set of production line consist of following units:
1. Manual Decoiler 1 set
(1) Max. Decoiling Width 1250 mm
(2) Max. Loading Capacity 5,000 kgs
(3) Motor 3KW, frequency control
(4) Coil's Inner Diameter ? 508 mm +/-30mm

2. Pre-Shearing 1 Set (Optional)
(1) Pre-shearer manual
(2) Blade material Cr12, heat treatment
(3) Stop the machine and then cut

3. Roll forming machine 1 set
(1) Rollers Station 16 Nos.
(2) Rollers' Material 40Cr, CNC Treatment
(3) Rollers' Surface Hard Chromed
(4) Main Shaft material 45#
(5) Main Shaft Diameter ± 75 mm
(6) Machine Side Wall Thickness 18 mm
(7) Motor Power 4.0 kw, with Frequency Inverter
(8) Roll-Formed Speed 3 - 4 meters / minute
(9) Power Transition by Gears & Chains
(10) Power Driven by Main Motor
(11) Speed Adjustment by Frequency Convertor

4. Hydraulic Step & Cut-Off 1 set
(1) Step Forming Device 1 set
(2) Hydraulic Pump Stand 1 set
(3) Hydraulic Pump Stand Motor 7.5 kw
(4) Cut-Off Blade 1 set
(5) Cut-Off Blade Material Cr12 Steel, Heat Treatment, HRC60-62
(6) Stepping Pressure 12 Mpa, Maximum
(7) Cutting Pressure 8 Mpa, Maximum
(8) Step height 4-14mm

5. Simple Run-Out Table 1 set
(1) Structure No Power, by round pipe supporting roller
(2) Quantity 3 Pieces

6. Electronic Control Panel 1 set
(1) Electronic Control System by PLC, Touchable Screen,Frequency Convertor, Encoder,etc.
Control pattern Auto-control the cutting quantities
Auto press length range:150-300mm
Auto cutting length range:min.800mm
Closed-loop double encoder
(2) PLC FX1N
(3) INVERTER Mitsubishi
(4) Touchable Screen Mitsubishi
(5) ENCODER OMRON
(6) Control Voltage 24V
(7) Power Suppler 380V, 50Hz, 3Phs
(8) Cut-to length tolerance ≤±2.0mm

QUOTATION
Price: Shall be confirmed after receiving your profile drawing.

PAYMENT TERMS
By T/T, 40% as Deposit and 60% Balance Before Shipment.

DELIVERY DAYS
90 DAYS

INSTALLATION, MAINTENANCE AND OPERATOR TRAINING
1. Guarantee Period:
1) In correct operation & maintaining, excluded the electric elements, guaranteed against malfunction due to manufacturing defects for 12 months from thedate of loading. Repairs will be made free of charge.

2) Repairs will not be performed free of charge even during the guarantee period in the following circumstances:
? Damage occur due to a natural disaster.
? Malfunction occurs due to user error.
? Malfunction occurs due to modifications.
? Malfunction occurs due to further movement or shipment after installation.

2. Seller is responsible for installation and adjustment and buyer covers installation cost as followed by T/T or cash before or on engineers' visit.
1) Round trip air tickets fee
2) At least three stars hotel and food will be charged to the buyer account.
3) The seller technician salary for installation machine: USD 100.00 / person / day (with 10 days); and USD150/day/person/over 10 days.
4) Round trip transportation cost from hotel to the buyer factory, necessary communication and insurance, etc.

3. Buyer must make preparation before seller's engineers visit:
1) Power Supplied: 380V, 50 Hz, 3Phs
2) Underground cable trucking, lubricant greases.