Home  >  Metal Processing Machinery  >  Machine Tool Equipment  >  Welding Equipment  >  Tube Welders

ppr pipe welding machine, 1. Spec:For Dia20-160mm pipe, 2.usage:PP-R,PE,PP-C,, 3.power:600W-2500W;, 4 Accuracy control the tem - details see: https://www.machineto.com/ppr-pipe-and-fitting-of-welding-machine-10143296

We show you some of our premier pieces :

1, Excellent quality,

2, Great design,

3, And affordable prices.

We can supply dia 20-160 PPR pipe and PPR fittings, also composite pipe, for instance PPR-FB-PPR pipe. We can arrange production to meet the customers’needs and preference!

Products specifications and details:

Contains:standard sockets,screws,allen wrench,vice foot.

The key technical indexes:

•ambient temperature: -20°C-50°C.

•RH: 45%-95%

•Voltage range: alternating voltage 176V-245V.

•Heating tip temperature: 260±5°C.

•Safety current: dielectric resistance≥1MΩ

•Leakage current: ≤5MΩ. (AC RMS)

USE METHOD

Step 1:

Fasten fusion splicer and install the heating tip. Put the fusion splicer on the shelf. Then, install the heat die head which suitable the specification of pipe and wrenching by the hex key wrench. Generally, small front, large in the post.

Step 2:

Power on, you’ll see the green light turns on and the red one turns off. It means that the machine has been on auto control condition, and can begin to work.(Attention: under the condition of auto control temperature, it remains in control, and doesn’t affect your operation.)

Step 3:

Splice the pipes

Cut off the pipe straightly by pipe cutter. Push the tubing and pipe fitting in the fusion splicer die head without spin, and work according to the enclosed sheet. Take down the tubing and pipe fitting from the fusion splicer die head as soon as it reaches the heat-up time. Insert the pipe at the desired depth quickly, straight homogeneous and non- spinning. And then form the joint a equality flange.

Attention: If the ambient temperature is lower than 5°C, please extend the heat-up time 50%.