Home  >  Metal Processing Machinery  >  Metal & Metallurgy Machinery  >  Metal Coating Machinery

1, Manual powder coating system, 2,Quick and simple color change, 3,Available with one or two guns (extensible), 4,CE - details see: https://www.machineto.com/powder-coating-machine-of-powder-coating-system-10162864

powder coating machine of powder coating system ,The CL-131S electrostatic powder manual coating equipment with the

COLO-06 manual powder gun is ideally suited for manual coating of objectsin larger series.

The process of the coating is like this :the powder is fluidized in the powder hopper. The injectors transport the powder through the hoses to the guns . The guns spray a powder/air mixture onto the workpieces.

Typical characteristics

-Processing the powder from the fluidized powder hopper

-Quick and simple color change

-Supplied ready for use

-Available with one or two guns (extensible)

0-100 Digital Adjustable KV
Fully Adjustable Amperage

Interchangeable with the Gema original equipment OPTIFLEX
Fully Adjustable Air for Pump on Pressure, Dosage and Nozzle Rinsing Air.
Comes with Full Array of Nozzle Assortment.
Field Tested and Proven to operate in the toughest environments.
Comes with different array of delivery systems:

Because this system is specially balanced for the maximum spray capability with
the Smoothest Finish Possible.

Configuration:

1pcs optistar control unit power supply cable

1 pc trolley

1pc 55L hopper

- 1pcs air filter

- A air pressure regulator

- 1pcs plug-in injector

- 1pcs optiselect manual powder gun with gun cable, powder

hose, rinsing air hose and standard nozzle set.

- Pneumatic hoses for conveying air (red), supplementary

air (black) and fluidizing air (black)

powder hose

Ground wire

Technical data:

Electrical data
Mains input voltage	100-240 VAC
Operating frequency	50-60 Hz
Input power	50W
Nominal output voltage (to the gun)	max. 12 V
Nominal output current (to the gun)	max. 1 A
	IP54
Ambient temperature range	0°C - +40°C (+32°F - +104°F)
Max. operating temperature	85°C (+185°F)
Approvals	CE
Pneumatical data
Compressed air connection	1/4" male quick release
Max. input pressure	10 bar / 145 psi
Min. input pressure (while unit in operation)	6 bar / 87 psi
Max. water vapor content of the compressed	air 1.3 g/m³
Max. oil vapor content of the compressed air	0.1 mg/m³
Packing Dimensions
Length	120CM
Width	79CM
Height	73CM
Weight	approx. 55kgs

Connection

The process of the coating is like this :the powder is fluidized in the powder hopper. The injectors transport the powder through the hoses to the guns . The guns spray a powder/air mixture onto the workpieces.

Application

Packing and Delivering

Factroy

Powder coating is a type of coating that is applied as a free-flowing, dry powder. The main difference between a conventional liquid paint and a powder coating is that the powder coating does not require asolventto keep the binder and filler parts in a liquid suspension form. The coating is typically applied electrostatically and is then cured under heat to allow it to flow and form a "skin". The powder may be athermoplasticor athermosetpolymer. It is usually used to create a hard finish that is tougher than conventional paint. Powder coating is mainly used for coating ofmetals, such as"whiteware,"aluminiumextrusions, andautomobileandbicycleparts. Newer technologies allow other materials, such as MDF (medium-density fibreboard), to be powder coated using different methods.

The powder coating process involves three basic steps:

1. Part preparation or the pre-treatment
2. The powder application
3. Curing

COLO Powder Coating Systems is a top supplier of powder coating systems and powder coating equipment including automated equipment, spray booths and spare parts for itw gema , wagner , nodrson , kci famous brand in china.

powder coating gun,powder coating machine,powder coating system,powder coating equipment,powder coating control unit