Home  >  Industrial Supplies  >  Machine Oil Purifier

1. Environmental Protection, 2. Energy Conservation, 3. PLC intelligent detection, 4. Automatic control, 5. Turnkey plant - details see: https://www.machineto.com/pollution-free-used-engine-oil-to-diesel-recycling-machine-10228502

Used Engine Oil Recycling and waste management(Turnkey Plant)

1. Purify the used machinery oil, hydraulic oil, compressor oil, motor oil, mediate-load gear oil, cooler oil, steel rolling oil, quench oil, flash swift quench oil, etc. in mine, metallurgical industry, machinery, chemical industry, rubber industry, instrument, traffic, petroleum drilling and exploring, construction ceramics, precision pressure casting, etc.

2. The viscosity is less than 500CST and flash point is higher than 900°C

3. The process is carried out by PLC with intelligent inspection and automatic control.

Techincal Indications:

Moisture content	10PPM
Mechanical impurities	‹ 0.022%
Pollution Degree	‹ NAS9
Be compare with new oil, viscosity change rate	‹+5%
Filter accuracy	3 micron
Efficiency	95%
Installed power	17KW
Regenerated oil quantity	800-1000KG/8H.

1. Technological Instruction:

Adopting ways of transportation by tins or buckets, the waste mineral oil are unloaded into filtering ponds directly. After the process of sedimentation and filter, pumped the waste oil into oil-water separator, then discharge the waste water and pump the isolated oil to tank separately.

Through secondary filter, heat the oil up to certain temperature, feed it continuously flow to vacuum film evaporator, further desorbs the water in the waste mineral oil to isolate the clean oil and heavy oil.

Then start the secondary filtration in molecular distillers to distillate the lubricating oil with Siemens PLC and color touch screen to control the whole process.

After cooling in condensator and stand still in buffer tank, pump the end product into tank.

2. Technological Parameter:

a. Process many kinds of waste oil such as waste hydraulic oil, used oil, diesel oil and waste gasoline etc

b. Distillation under high vacuum low temperature will not destroy the quality of the waste oil which is good for recycle.

3. End product after regeneration:

a. Clean and bright, moisture content less than 100PPM, separation degree of the heavy and clean oil is more than 90%

b. The quality of the heavy and clean oil achieves or exceeds the new oil.

c. Recycle rate achieve more than 80%

4. Equipment Configuration:

a. Not fussy about the waste oil, it can recycle the waste oil no matter what condition it is.

5.Waste oils to recycle

Waste engine oil

Waste lube oil/used lubricant oil/used lubricating oil

Waste motor oil

Used hydraulic oil

Waste vacuum pump oil

Waste mechanical oil

Waste insulating oil

6.End oils to get from this whole machine

SN150 standard base oil

SN200standard base oil

SN350standard base oil

SN500standard base oil

(NOTE: You can choose which grade oil you want, then our engineer design for you accordingly.)

7.Complete plant contains:

1. Vacuum system

2. Thermal oil heating system

3. Electric control cabinet

4. Technical personnel training

5. Technical training and so on.

8.Process diagram and main technology to use:

1. Thermal oil transfer heating system

2. Vacuum system, machine running in negative press

3. Film Evaporator

4. The molecule distill

5. PLC intellegent control

6. Thermal recycling system

9.System Working Station:

10.Electronic Control Device: