Home  >  Raw Material Processing Machinery  >  Rubber Raw Material Machinery

a.Process tires,plastic ,rubber into fuel oil, b.National patents, c.Without pollution, plastic waste pyrolysis plant - details see: https://www.machineto.com/plastic-waste-pyrolysis-plant-with-safe-operation-system-10340792

Plastic waste pyrolysis plant with safe operation system

How to operate this machine?

1) feed the raw material into furnace automatically or manually, then seal the feed inlet system

2) heat the reactor by burning the fuel material(coal,or wood,or natural gas ,oil ) in the combustion system

3) the reactor will slowly become heat ,when the temperature reach around 250 degree celsius, the oil gas will be formed

4) After processed by our technology, the oil gas will go to cooling system for cold liquid oil

the gas which can not become liquid under normal pressure , will be designed to go back to combustion system through safety device

instead of the fuel material to burn the reactor, which is environmental friendly and can save you much energy

5)After finished oil produce ,the temperature of reactor will be down,while,carbon black can be discharged automatically

6) when the temperature fall down to 100 degree celsius,worker could opened the door of reactor to discharge of steel wire

7) Then can start to another batch working

Specification
Name	plastic waste pyrolysis plant
Raw material	tire, plastic, rubber
Average oil yield	Truck tires	45%-50%
	Car tires	40%
	Bicycle and motorcycle tires	30%
	Offcut of recycled paper mill	20%-30%
	Fishing net, safety net, farm-oriented film	40%-50%
	Convenient bags, woven bags	40%
Heating material	Coal ,charcoal, fuel gas, fuel oil
Material of reactor	Q245R boiler plate
Cooling mode	Waster cooling
Thickness of reactor	12/14/16/18mm
Rotate speed of reactor	0.4 turn/minute
Driving method	Gear drive
Total power	15Kw

Power consumption of plastic waste pyrolysis plant :

System	Components	Purposes	Power
Pyrolysis system	Automatic slagging system	It can take the carbon black out of the reactor automatically.	4 kw / h
	Cracking reactor	The raw materials are pyrolyzed in the reactor. It is 245R boiler steel.	3 kw / h
	Gas separate	The impurities will be deposited at the bottom of the gas separate.
	Depositing tank	The second filter, so that the oil gas will be refined.
Cooling system	Cooling pool	The oil gas will be cooled down in the cooling pipes of the cooling pool.
Oil store system	Oil tank	It can store the crude oil.
Waste gas recycle system	Waste gas recycle system	1. It can recycle the waste gas to be the fuel of heating reactor. 2. It can be used as a fire-resistant machine.
	Spray gun	Recovered exhaust gas burned by spray gun to save energy and heat up the cracking reactor.
	Blower	Inhale air into furnace to increase the combustion of the fuel.	0.25 kw / h
	Furnace	It is placed for fuel like wood, coal and charcoal.
Deduster system	Desulfurization deduster	It can change the smoke and dust into purified gas.
	Water film cyclone	It is the second deduster system. It can change the little smoke and dust into purified gas.
	Draft fan	It can inhale the smoke and dust in the furnace into the deduster system.	4 kw / h
	Chimney	The white smoke without pollution will release into the air from the chimney.

The advantages of plastic waste pyrolysis plant :
(1) The material of products use Q245R which guarantee the quality and the thickness is 16mm so that it can extend its service life.
(2) The energy saving is an obvious feature of our device.After two hours' burning you don't have to add any fuel,because the waste gas from the burning will

be used to be the new fuel and then you will save your fuels.
(3) Environmental protection is another advantage of our machine.Through spray dust removal,the clean gas finally release into the air.
(4)Safety is the most important.In order to ensure the safe operation ,our device set up safe equipments,such as
alarm, safety valves, thermometer, pressure gauge and safety valve.