Home  >  Raw Material Processing Machinery  >  Plastic Raw Material Machinery  >  Plastic Mixer

Plastic internal kneading machine, 1.Motor:160KW., 2.Super seal,no leakage., 3.Double blade with special design., 4.Bearing bush - details see: https://www.machineto.com/plastic-internal-kneading-machine-10338273

Plastic internal kneading machine

A. Basic information:

For masticating and kneading natural rubber, synthetic rubber, EVA or PVC
pellets with various kinds chemical material and warming the cold material
which shall be supplied to the calender, embossing calender or hot presses.

B. Machine Parameters:

Kneader mixer	X(S)N-5	X(S)N-20	X(S)N-35	X(S)N-55	X(S)N-75	X(S)N-95	X(S)N-110
Mixing capacity (L)	5	20	35	55	75	95	110
Actuating motor (kw)	7.5	37	55	55/75	90/110	132	160/200
Turnover motor(kw)	0.75	1.5	2.2	3.0	4.0	5.5	5.5
Turnover angle (º)	110	110	140	140	140	140	140
Air compressor motor (kw)	1.5	3.0	5.5	7.5	11.0	15.0	15.0
Dust cleaner	HLL-10	HLL-10	HLL-10	HLL-15	HLL-20	HLL-30	HLL-30
Water cooling(Rubber refining)Mpa	0.2-0.4	0.2-0.4	0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4
Steam heating(Plastic refining)Mpa	0.5-0.8	0.5-0.8	0.5-0.8	0.5-0.8	0.5-0.8	0.5-0.8	0.5-0.8
Electrical heating(Plastic refining)KW	4	9	12	15	18	24	24
Weight (kg)	1200	4500	6500	7800	10500	12500	14500
Dimension (LXWXH) (mm)	1900x950 x2400	2600x1400 x2600	3200x1900 x3000	3500x2600 x3300	3900x2900 x3400	4000x3200 x3700	4100x2900 x3800

C. Advantages:

1.Maximum Dispersion & High Production
Double blades with special spiral angle, proper clearance & high cooling effect gives excellent dispersion which can not be obtained from an open mill. Its production is 4 to 5 times more than an ordinary mixing mill thus saving on labor and electricity.

2.Super sealing,no powder leakages.

Both sides of the rotor blades are injected welding a iron alloy ring, which assures sealing and protects the blades from abrasion.Imported bakelite sealing ring,which make super sealing.The chamber around are designed with groove,then embeded with rubber stip,this make sure the whole mixing chamber is well sealed.

3.No Foundation Requirement
The Kneader has a common bed plate for all parts and not require foundation.

4.Easy Cleaning & Colour Change
Mixing chamber can be tilted down for 140degree, which enables easy cleaning, because of this, different coloured compounds can be made without trouble.

5.Easy Operation
Easy operation with Push-buttons and hand lever valves from the operation board.

6.Short Mixing Time
Mixing time ranges from 6 to 12 minutes depending on compound's specific gravity.

D. Machine photos:

If you are interested to know more about our machines, pls feel free to contact with me,I am very glad to service you.Thank you for your time!