Home  >  Apparel & Textile Machinery  >  Shoemaking Machines  >  Shoe Moulding Machines

plastic bottle making machine, Capacity: 2000-4800BPH, 2cav, 4cav, 6cav, Fully automatic, with hopper and auto loader - details see: https://www.machineto.com/plastic-bottle-making-machine-10268770

PET blow molding machine( PET blowing machine, PET blow moulding machine)

Application:PET mineral water bottle, beverage bottle, cosmetic bottle, medicine bottle, etc

Production Capacity:2000BPH, 3500BPH, 4800BPH

Max. Bottle Volume:2L

Configuration:Mitsubishi PLC interface & touch screen, BURKERT solenoid valve, Festo pneumatic component, ABB transducer, OMRON sensor, Schneider electric component.

Automatic blow molding machine is designed uniquely with the innovative and reasonable mechanical structure. During the whole producing process, the bottles mouth faces down to avoid being overheated in the process of heating, which extends the application widely used. We adopt the cheap compressed air as driving power, applying the updated PLC technology to control automatically; presetting parameter, built-in self-diagnosis, alarm and LCD display function. Touch-screen is adopted human interface, friendly and visible which is easy to learn.

Preform up structure

The up one is to control the action of preform conveying structure. If there are too many preforms in the tunnel, the moving will be stopped; if not enough, it will get preforms automatically from preform conveying structure.

Heating tunnel

Preform heating structure is made up of three sets of heating tunnel in serials and one blower. Each heating tunnel has been installed with 8 pieces of far ultra red and quartz lighting tube which are distributed on each side of the heating tunnel.

Mould-closing device

It is located in the middle part of the machine and is composed of mould-closing cylinder, moving template and fixed template, etc. Two halves of the mould are fixed on the fixed template and moving template respectively.

PLC control system

PLC control system can watch on the preform temperature and if all the actions are finished according to the setting programs, if not, the system will stop automatically

to avoid fault expanding. Besides, there are fault reason tips on the touch screen

Blow structure

Thanks to adopting bottom-blow structure, the bottle mouth is always facing down to be prevented from the pollution of dust and dirtiness.

Air separation system

The blowing air and working air is separated from each other. . If the customer is able to use the clean blowing air, it will ensure the production of bottles clean at most.

Parameter

ITEM	UNIT	SPECIFICATION
Max. Capacity	BPH	2000	3500	4800
bottle volume	L	0.2~2	0.2~2	0.2~1.5
neck diameter	mm	28~30	28~30	28~30
bottle diameter	mm	110	110	100
bottle height	mm	335	320	320
mould opening	mm	150	140	150
mould cavity	Piece	2	4	6
space between two cavities	mm	128	190	190
clamping force	KN	150	300	450
length of stretching	mm	≤340	≤340	≤340
power	KW	16.5/10	24.5/16	33/22
temperature control section		8	8	8
voltage/phase/frequency		380V/3/50HZ	380V/3/50HZ	380V/3/50HZ
main machine dimensions	mm	2900x2000x2100	2950x2000x2100	4300x2150x2100
weight	kg	2600	2900	4500
conveyor dimension	mm	2030X2000X2500	2030X2000X2500	2030X2000X2500
conveyor weight	kg	280	280	280

Panel

Loader

Heat tunnel

Tidy

Blow molding

Lay off

Product