Planner and moulder wood machinery for furniture industry

Advantage:

1.The work table and machine frame adopt quality cast iron,which can keep the stable performance and good accuracy.

2.The complete closed structure safety hood and power-off against opening device

3.Each spindle is matach with each motor,the control is eacy and cutting powerful.

4.The worktable adopts special wear resistance material,and done special treatment and plated hard chrome.So it is high precision and wll wear-resistance.

5.The pressure feeding device adopts sectional type pnenumatic pressing,the pressure is balancing and adjusting is easy.

6.There are driving rollers in the front,middle and rear workable,making the feeding smoothly and powerful.

7.The first spindle is with the straight cutting,the q-type workable is the alloy steel,it is very wear-resistance.

8.The first bottom horizontal spindle is for plain planing,it can lift the 1st and 2nd feeding roller,and can plane by manually.

9.The manua pump lubricates the work table and the dovetail plate by centralized control away.The operation is conveninent.

10.The import frequency inverter can achieve 6-36m/min(Except the 423A,523a)

11.All the electric components and transmission units are from quality international brands,which keep the good stable and reliable performance.

12.W series :The last spindle is universal spindle ,can change 360° angle.

13.R series:It has 3 vertical spindles ,the cutting capacity is powerful and good quality.

1. CE configuration.

2. Enhance capacitance of the power of electrical power shaft.

3. The feeding table is increased by 2500~3000.

4. The surface of the electrical pump lubrcating table.

5. Every main axis adopts brake system.

The machine frame adopt quality cast iron,which can keep the stable performance and good quality.

The workable adopts special wear-resistance material,and done special treatment and plated hard chorme.So it is well wear-resistance.

The lubricate for the work table and elevation guide rail by centralized control way.The operation is conveninent.

The front og lift vertical spindleshas 3 groups side-pressure.The adjusting is easy and feeling is stable.

There is the device for machining the shore piece.It makes the feeding smoonthly.