Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Road Machinery  >  Road Marking Machines

Engine: America Briggs & Stratton 6.0HP vertical air-cooled gasoline engine. - details see: https://www.machineto.com/planispiral-road-marking-remover-10120264

1. Engine: America Briggs & Stratton 10.5HP air-cooled gasoline engine, and the throttle is controlled by handle brake.

2. Removal cutter: imported tungalloy cutter is hard and high speed rotating. And the cutter has two kinds of 24teeth and 48teeth. The 24teeth cutter is also called thermoplastic cutter which is used for removing thermoplastic marking, and the 48 teeth is mainly used for removing cold plastic marking. Commonly, no matter thermoplastic or cold marking, the two kinds of cutters can be used. And both have long service life, and are easy to assemble.

3. Depth adjuster: fixed with depth adjuster equipment, adjust and fix it according to the needs. Adopt accurate pitch, which can control the depth accurately according to needs.

4. Pressure adjuster: fixed with depth dial; adjust the pressure of removal cutter to road surface. According to the conditions of road surface and different kinds of paint, adjust the removal pressure, whose max pressure can insert into road surface.

5. Protective device: automatic clutch makes the cutter automatic clutch with removal shaft according to the engine speed and the conditions of road surface, which makes sure the high quality removal, fewer damages and extends service life. Dust collector interface 76mm (optional dust collector device). Option for watering device, which greatly reduces the dust produced on job site. Rubber bush fixed around the cutter can prevent dust and fragment during construction, which makes sure the safety of operator.

6. Emergency stop device: equipped with emergency stop switch, which can stop the machine in short time.

7. Parking device: convenient foot control parking system makes the machine in safety condition in any time.

8. Operation: forward, back off, left or right freely. Removal width can up to 620mm when left-right operation, removal width can be up to 180mm when forward or back off.

9. Chassis: a firm welded frame, whose surface has been chrome-plated or high temperature treatment; the four-wheel structure makes the whole machine work more stable, and operation more convenient.

10. Wheel: front wheels are special abrasion resistance improved rubber wheel, the diameter is 250mm, back wheels are abrasion resistance improved rubber wheel, the diameter is 150mm, which can effectively prevent tackless or deformation after the shaking for a long time front and back wheels are special steel wheels. Equipped with high speed imported bearing makes the whole machine lighter.

11. Size & Weight: 1240 mm (L) ×770 mm (W) ×1100 mm (H). Weight: 230kg.