Home  >  Pharmaceutical & Chemical Product Machinery  >  Pharmaceutical Machinery  >  Capsule Polisher

1.Capsule polisher with function of sorter as well., 2.Polishing capsule or tablet,eliminating static electricity. - details see: https://www.machineto.com/pgj-100a-series-capsule-sorting-polisher-10304484

PGJ-100A Series Capsule Sorting Polisher

Description

Capsule sorting polisher with function of sorter as well. It plays the function of not only the polishing for capsule and tablet but eliminating static electricity. It can also automatically reject low weight capsule; loose piece and fragments of capsules. It is suitable for all sizes of capsules without the need to change parts.

1.The height and tilt of machine can be adjusted, it can be equipped with any mode of capsule filling machine, which can polishing the capsule immediately, improve the quality of polishing and production capacity.

2.During running, it can automatically sort the capsules that are with small amount, shell, debris, cap and body of capsule separated. This procedure meets the GMP requirements.

3.It is made of stainless steel that meets GMP requirements. It adopts quick connect components assembly, which make the users easily disassembly and clean the machine.

4.There is roller brush and demolished bearing in main shaft, user can disassembly the brush and bearing when cleaning, and the bristles do not fall off. Users also can replace the different specifications of brush, which meets the polishing of different kinds of drugs.

5.There is also safety protection device; the speed of motor can be controlled by the inverter. The machine can continually runs, and bear a lager starting torque.

6.This machine can not only equip with the capsule filling machine, but also independent use.

Working Principle

2.The turning brush brings capsules from B to C the cylinder.

3.Within the net cylinder brush D polishes and deducts the capsules. The loose piece and fragments are retrieved by vacuum sucker E.

4.The brush conveys the capsules to the outlet of cylinder F.

5.In the sorter segment G clean compressed air collects low weight capsule; loose piece and fragments of capsules to H the collector.

6.The pressure of the compressed air is shown on the filter decompressed valve meter I, which can be adjusted at different requirement.

7.The qualified capsules are ejected from outlet J.

Main Technical Parameters

Model	PGJ-100A	PGJ-100
Max Output Capacity (pcs/h)	300000	150000
Power Supply	1PH 220/110V 50~60Hz	1P 220/110V 50~60Hz
Dimension(mm)	1150×600×(H:870 ~1000)	950×600×(H:870 ~1000)
Weight (Kg)	40	35
Compressed Air	0.25m3/min 0.3Mpa	0.25m3/min 0.3Mpa
Vacuum	2.7m3/min -0.014Mpa	2.7m3/min -0.014Mpa