Home  >  Industrial Supplies  >  Filter Supplies  >  Filter Meshes

1.PES pleat filter element, 2.FDA listed materials, 3.Manufacturer at factory price, 4.In beverage industry - details see: https://www.machineto.com/pes-pleated-filter-element-for-beverage-offered-by-china-manufacturer-10218610

Manfre Supply PES Pleat Filter Element

---Professional Manufacturer

The polyethersulfone membrane provides high contaminant capacity,
superior flow rates and consistent removal of particles and microorganisms.

The cartridges are highly compatible with the mostrigorous sanitizing methods
in the beverage industry. Reliability is further assured with the Manfre integrity
testable design.

Filter Specifications	Dimensions / Parameters
Media Asymmetric polyethersulfone membrane Inner core, end caps, cage Polypropylene Support layers Spunbond Polypropylene Gaskets/O-Rings Buna-N, EPDM, Silicone, Viton, Teflon encapsulated Viton O-Rings Micron ratings 0.2 µm, 0.45 µm, 0.65 µm	Nominal lengths 9.75", 10", 20", 30", 40" Outside diameter 2.7" (6.9 cm) Inside diameter 1.0" (2.54 cm) Surface area 7.6 ft2. (0.7m2) per 10 inch element	Max. sustained operating temperature 180F (82C) at 20 psid (1.38 bar) Max. differential pressure 60 psid @ 80F (4.14bar @ 27C) 30 psid @ 160F (2.07 bar @ 71C) 15 psid @ 200F (1.03 bar @ 93C) Max. reverse differential pressure 40 psid @ 70F (2.76 bar @ 21C) Recommended change-out pressure 35 psid (2.4 bar)

Performance Specifications

Hot DI Water	Filter cartridge will withstand temperatures of 185F (85C) for up to 30 consecutive minutes.
Cleaning/Sanitization	Compatible with most common chemical cleaning, sanitizing and sterilizing agents and with pH range from 1–14. Consult factory for specific compatibility information.
Steam/Autoclave	Cartridges may be steamed or autoclaved for at least 50 half-hour cycles @ 275F (135C).
Typical BacterialRetention Performance	Pore Size	Retention
	0.2 µm:	LRV for B. diminuta ≥ 7.8
	0.45 µm:	LRV for S. marcescens ≥ 8.5
	0.65 µm:	LRV for S. cerevisiae ≥ 11 LRV for L. brevis ≥ 7.6
Integrity Test SpecificationsMinimum Bubble Point values and maximum Diffusive Air Flow (per 10-inch cartridge) values for Manfre filters wet with water:	Pore Size	Bubble Point	Diffusive Air Flow
	0.2 µm:	≥ 38psig (2.6 bar)	≤ 35cc/min @ 30psig (2.1 bar)
	0.45 µm:	≥ 25psig (1.7 bar)	≤ 35cc/min @ 20psig (1.4 bar)
	0.65 µm:	≥ 18psig (1.2 bar)	≤ 35cc/min @ 15psig (1.0 bar)

Quality Assurance

Manufactured in an ISO Class 7 cleanroom environment

100% flushed with 18 MΩ-cm DI water and integrity tested

Meets USP Class VI Biological Test for Plastics

All materials are FDA listed for food and beverage contact

Repeatably steamable and sanitizable

High retention (LVR>7) of yeast and other spoilage organisms

Pore size, lot and serial number are stamped on each filter
element for identification and traceability

We have our own factory,Professional producing team.

Korea technology is adopted,Have rich export experience.

Special specifications can be produced by the customer's

requirements.

Welcome custom!!!