Home  >  Material Handling Equipments & Parts  >  Material Handling Equipment  >  Conveyors

Features:, 1.Elongation : >350% -->450%, 2.Belt width (mm): 250-2,500, 3.Tensile strength 10~24Mp, Abrasion loss:< 120mm3(24mp) - details see: https://www.machineto.com/patterned-conveyor-belt-10197360

Basic Advantage:

1. Good elasticity
2. Good trough ability
3.2 years quality assurance
4.pattern can be designed .

suitable for conveyor mealiness ,graininess,small piece materiel,aslo conveyor materiel in bag . The slope angle less than 45°.prevent materiel down slope ,improve conveying capability

Product feature:
Patterned conveyor belt is composed of belt carcass and pattern. Pattern shape and height (depth) may be different because of different conveyed material and conveyor.
1. Shape and characteristics:
On surface of the belt, there is chevron pattern higher than the belt body. The pattern may be either open-end or closed. Each kind of pattern includes three types of high, medium and low.
2. Usage:
Suitable for convey powdered, granulated and small lump materials at the gradient of no more than 45°. It can also convey packaged materials.

Herringbone Pattern
Usage: It's suitable for transporting powdery, granular, particle material, material packed in bags
at the conveying angle of not more than 40o.

Strip Pattern
Usage: It's suitable for transporting materials in bags at the angle of not
more than 30o or at leveling. If in the trough, it can replace herringbone
pattern.

Granular Pattern
Usage: Projected granular patterns are suitable for transporting materials in
soft bags, the material with gripping power, or for none-slip conveying;
Indented patterns at the angle of not more than 30o or at leveling.

in addition:
1) Special patterns can be designed according to the customer's request.
2) We can offer the pattern conveyor belt with the belt width less than or
equal to 1500mm.

Widely used in port, mining, electric power,construction, food supplies etc.

The detail data for Patterned Coneyor Belt with CC,NN,EP Carcass as following form:

Specification and technical data OF Patterned conveyor belt Fabric specs Ply thickness (mm/p) Strength series (N/mm) Cover Thickness (mm) Width Length 2ply 3ply 4ply 5ply 6ply Top Bottom mm m CC/NN/EP80 0.8 160 240 320 400 480 2.0--8 0--4.5 300 -- 2500 ≤300 CC/NN/EP100 0.8 200 300 400 500 600 2.0--8 0--4.5 300 -- 2500 ≤300 CC/NN/EP125 0.85 250 375 500 625 750 2.0--8 0--4.5 300 -- 2500 ≤300 CC/NN/EP150 0.9 300 450 600 750 900 2.0--8 0--4.5 300 -- 2500 ≤300 CC/NN/EP175 1 320 480 640 800 960 2.0--8 0--4.5 300 -- 2500 ≤300 CC/NN/EP200 1.2 400 600 800 1000 1200 2.0--8 0--4.5 300 -- 2500 ≤300 CC/NN/EP250 1.4 500 750 1000 1250 1500 2.0--8 0--4.5 300 -- 2500 ≤300 CC/NN/EP300 1.5 600 900 1200 1500 1800 2.0--8 0--4.5 300 -- 2500 ≤300 CC/NN/EP350 1.7 700 1050 1400 1750 2100 2.0--8 0--4.5 300 -- 2500 ≤300 CC/NN/EP400 2.2 800 1200 1600 2000 2400 2.0--8 0--4.5 300 -- 2500 ≤300 CC/NN EP500 2.5 1000 1500 2000 2500 3000 2.0--8 0--4.5 300 -- 2500 ≤300 Adhesion and elongation of belt Belt carcass Adhesive strength elongation Between plies(N/mm) Between rubber and carcass Longitudinal elongation at break%≥ Longitudinal elongation at reference load%≤ CC/NN/EP canvas ≥5 ≥5 10 2.0 Technical data of cover rubber Cover grade Tensile strength ≥ Elongation ≥ Abrasion ≤ Change rate of tensile strength and elongation after aging MPa % mm3 % RMA1 17 400 175 -25+25 RMA2 14 350 250 -25+25 Z 15 350 250 -25+25 Y 20 400 150 -25+25 X 25 400 120 -25+25 W 18 400 90 -25+25

PHOTO SHOW: