Home  >  Apparel & Textile Machinery  >  Textile Machinery  >  Textile Finishing Machines

interlining coating machinery product width(mm):1600, Machine Speed(m/min):0~30, Power supply(kw):380V 50HZ 70kw - details see: https://www.machineto.com/pasty-dot-interlining-coating-machinery-with-the-electric-oven-10278381

Product name:pasty-dot interlining coating machinery with the electric oven

Model no.:DJ02-175

Brand:Dahe

Origin:china

1. 1. Usage:

Thisinterlining coating machineryis suitable forcoatingmid and high grade size pointlaminating fabricof nonwoven, knitted, warp-knitted-weft-insertion fabrics, and base cloth.

1. 2. Main Technological Requirements:

2.1 interliningCoating machinery width:1200mm

2.2 Speed: 5-30m/min

2.3 Power units:

2.3.1size pointdriving motor: 1.5 kW Size furnishing pump motor: 0.75 kW

Size mixing pump motor: 0.75 kW Air compressor: 3 kW

Heating power of dryer: one burner 62.8J

Padding flat driving motor: 2.2 kW Circulation fan: 5.5 kW

Humidity exhaust fan: 100W

2.3.2 Total power: 3 phase 380V 50Hz Control power: 220V Installed capacity:20 kW

1. 3. Structure Characteristics

3.1 Thisinterlining coating machineryconsists of debaucher, size point device, dryer, cooler, rebutter and electric control board.

3.2 Debaucher

3.2.1 Roll-off creel is suitable for piece or package fabrics to meet demands of different cloth feeding.

3.2.2 Tension of cloth feeding can be adjusted by hand wheel.

3.2.3 Cloth guider adjusts cloth feeding in the center to ensure proper position for sizing.

3.3 Size point device

3.3.1 STOCK Standard model. Stainless steel pneumatic blade, pneumatic weighing, squeeze,squeeze carrier, rotary screen, driving head.

3.3.2 Two groups of stainless steel outer squeezes, support roller, compression roller and opening roller.

3.3.3 Speed regulating size agitator

3.3.4 Improved size furnishing pump, speed regulating, manual and level control

3.3.5 3 sets of nickel screen, normally 17 mesh, 25 mesh and CP 66

3.4 Dryer

3.4.1 Teflon conveyor for delivery and stray preventing device provide good curing effect, the matrix runs in tensionless state, thus it features heat shrinkage reduction and stable width and soft handle.

3.5 Cooling and rebatcher device

Cooling part consists of three roller with water cooling.

3.6 Rebatcher part

Friction rebatching adopting Traditional method of rebatching roller linking with padding flat enables convenient operation.

3.7 Electric controller

3.7.1 Thisinterlining coating machineryis driven by imported frequency conversion speed regulating motor, it features stable drive and large scope for regulating.