Home  >  Metal Processing Machinery  >  Machine Tools Accessory  >  Other Machine Tools Accessories

1) nice in appearance, 2)reasonable in structure, 3)dependable in performance, 4)stabile in pitch & fast and smooth in running - details see: https://www.machineto.com/paper-wrapping-wire-machine-with-4-heads-max-16-layers-2-machines-to-be-one-line-10155651

Feedstock

Wrapping paper

Width:	10~32mm
Thickness:	0.040~0.125mm
density	800kg/M3

bobbin size

Take up Bobbin& pay off bobbin size shall follow the drawing provided by the buyer

paper wrapping

Wrap direction: Film taping head rotation direction can be adjust turn positive or negative

Wrap tape: range of paper wrapping opposite joint distance: <0.4 mm

Overlap:0~50%

pay off:2 sets

Type:A shaft type pay-off,lifting and lowering by Electric lift wooden dish,pay off wire with belt damping;

Straightening device:2sets

Straightening units:5 pcs horizontal, 5 pcs vertical

Diameter of straightening units:Φ46mm

Distance between center:70mm

self-hard device: 2set

type: hard roller

each flat surface with rollers: 9 rollers

roller dia: 47mm

roller center distance: 67mm

stretch way: screw manual adjustment, with reading ruling

Test strength after harden finish: ( base on <=60mm 2 area): 200 N/mm

Tapping head:4sets

• Diameter of paper plate:External diameter at 330mm, internal diameter at 75mm
• Quantity of paper plate on each tapping head:3 pcs
• Locking mode of paper plate:Locknut
• Position of paper plate:3 pcs on one plane
• guiding roller of each wrapping head entrance & exit : including(slide tube add150 mm)
• Adjusting looseness of paper wrapping:Adjustable spring
• Adjusting angle of paper wrapping:Guiding roller
• Wrap tape: range of paper wrapping opposite joint distance:<0.4 mm ,Overlap:0~50%
• auto-paper wrapping opposite joint: yes
• Wrap angel range: 15~70 angle
• Adjusting angle of paper wrapping:Rotating roller
• Breaking detector theory:Automatic stop with optic electric inductive
• Position of mechanical breaking detector:Behind the paper breaking stopping guidance roller
• Quantity of mechanical breaking detector of each tapping lead:Each paper roll has one breaking detector, the breaking detector can play same role of paper finishing detector
• Materials of rollers in contact with wrapping paper:C45 steel or stainless steel or plastic, every rollers are polished slick without any coarse, burr or hollow defects.
• Linkage pole:movement smoothly
• Steel part:With antisepsis treat
• Power transmission:By step less transmission, gear box and long axis
• Control of rotating direction:By magnetic clutch.
• Max rotating speed:800RPM
• Actual max working speed:600RPM
• rated speed for wrap head moving balance: guarantee
• Wrapping head speed display: digital display

pulling caterpillar:2set

• Width of belt:400mm
• Contact length:400mm
• Belt material:Rubber
• Hardness of belt:715kg/cm
• Shape of belt:Dent form
• Max pulling force:800kgf
• Max opening distance between belts:40mm
• Power of caterpillar:Provided by main engineer
• Synchronization:Mechanically connected
• Adjusting method:Mechanic screw

meter measuring device:2set

Type:Electrical display

Length measuring:By the wheel that directly contacts wire

Length measuring:automatically Stopping the machine at setting length

take up:2set

• type: lowering and lifting by motor
• Installing bobbin:With pintel of bearing
• Lifting and lowering bobbin:Electric lift
• Horizontal moving drive: through :torque motor
• Motor voltage:0.75KW
• drive mode: torque motor control tension
• Wire Traversing : by polish rod automatic device
• Sides way direction adjust: limit switch

main power 2 set

power voltage: 5.5kw

PIV transmission: support

Electric control: 2 set

sensor: zhengtai or Omron

torque motor: shanghai haozheng

frequency motor: shanghai huabin

Transducer : Shenzhen weichuang( japan technology)

PLC: Amson