Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Mineral Separator

1.various types, 2.high capacity, 3.easy to operate, 4.widely used - details see: https://www.machineto.com/ore-magnetic-separator-from-zhengzou-henan-10315007

Ore Magnetic Separator From Zhengzhou Henan

1.brief

Magnetic separation is generally a low cost method of recovery, unless high intensity separators are required. The electro-magnetic high intensity separators that produce 20, 000 gauss, tend to be expensive. However, the rare earth magnetic

separators are relatively inexpensive and can produce magnetic fields around 6, 000 gauss. So, when looking for a process

to recover valuable minerals, magnetic separation should not be overlooked, if some of the material is magnetic or PARA-magnetic.

2.principle

When the raw materials flow into the tank body of the wet drum magnetic separator, firstly, the flowing direction of the raw materials

is the same as the rotary direction of the magnetic drum, the iron magnetite materials are attracted to the surface of drum. This is the

first separation. In the second step, the flushing water below flush the raw materials back for the second separation. This time the

flowing direction of the raw materials is opposite to the rotary direction of the magnetic drum. Then along with the rotation of drum, the

iron magnetite materials on the surface of drum will finally leave the magnetic field and fall to the ore concentrate box under gravity. Also,

the flushing water above helps to flush the iron magnetite into the ore concentrate box. The weak magnetic and non-magnetic materials can not be attracted and will flow to the discharge pipe for tailings.

3. structure

Magnetic separatoris made up by the cylinder, magnetic system, tank, magnetic guides, bracket, spray pipe, to the mine box, unloading ore pipes, floor, magnetic declination adjustment device and bracket.

4.species

Dividedinto wet and dry in accordance with the operating conditions;
In accordance with the magnetic source is divided into electromagnetic and permanent magnet;
in accordance with the device structure is divided into disc, roller, ring, the vertical ring induction roller.

5.application

(1) Updating Ferrous Metals: Martite, Hematite, Siderite, Chromite, Ilmenite, Manganese, Etc.

(2)Separating Non-Ferrous Metals: Wolframite and Quartz, Pyrrhotite and Cassiterite, Wolframite and Cassiterite, Limonite Purifying, Scheelite, Wolframite and Garnet, Etc.

(3) Recovering Rare Earth: Tantalum and Niobium, Lepidomelane, Monazite, Etc.

(4)Brightening Non Metals: Quartz, Feldspar And Kaolin for Ceramics, Sillimanite, Cassiterite, Andalusite, Kyanite for Refractory, and Separating Impurities From Hornblende, Mica, Tourmaline, Garnet, Etc.

6.feature

reasonable structure; large particles clean easily;housing strength and good rigidity; transmission System simple and durable;easy to access, easy to adjust.

7.main technical parameter

Model	Model	Trough line	Speed	Feed size	Capacity		Motor		Weight kg
					Dry ore (t/h)	Ore pulp (m 3 /h)	Model	Power kw
CTB-69	φ600×900	half against	40	0~0.2	8~15	24	Y90L-4	1.5	910
CTN-69	φ600×900	Opposite flow	40	0~0.6	8~15	24	Y90L-4	1.5	780
CTS-69	φ600×900	Down flow	40	0~6	8~15	24	Y90L-4	1.5	830
CTB-612	φ600×1200	half against	40	0~0.2	10~20	32	JTC-561	2.2	1500
CTB-618	φ600×1800	half against	40	0~0.2	15~30	48	JTC-561A	2.2	1390
CTN-618	φ600×1800	Opposite flow	40	0~0.6	15~30	48	JTC-561A	2.2	1330
CTS-618	φ600×1800	Down flow	40	0~6	15~30	48	JTC-561A	2.2	1340
CTN-718	φ750×1800	Opposite flow	35	0~0.6	20~45	72	JTC-562A	3	2100
CTS-712	φ750×1800	Down flow	35	0~6	20~45	72	JTC-562A	3	2100
CTB-718	φ750×1800	half against	35	0~0.2	20~45	72	JTC-562A	3	2100