Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Hot Air Furnace

Industrial air heater dryer, 1. can be used for drying materials with size less than 3mm, 2. running continuously;, 3. few lab - details see: https://www.machineto.com/orb-industrial-air-heater-dryer-with-high-output-10292663

Usage:

1. Industrial air heater dryer for biomass dust is suitable for dry the grain, saw dust,etc small granular materials.

2. It can dry the raw materials quickly and with hight capacity

Drying process:

Wet material is input into the hopper. The stove generates hot air, hot air mixed with wet sawdust and then sucked into the pipes by the exhaust blower , flowing and go though the curving pipes and buffer (drying chamber) of dryer, thus the wet sawdust is dried, and the dried sawdust is discharged from the outlet with air lock.

ORB Industrial hot air Dryer Characteristic:
Powerful drying, l ittle invest and the amount of evaporated moisture in high. The drying time is short. The finished product is separated from outside, and no pollution with high quality. The equipment is a total set. The heat source can be choose from steam, coal fuel, oil fuel and gas fuel and gas fuel hot air furnace.

ORB Industrial hot air Dryer Working principle:
The work process is that air stream is formed through the negative pressure of blower, the materials enter into the pipe through the feeder, so that the hot wind and the materials mix together, and the moisture is separated from the materials when passing the cyclone, then the materials are dried.

ORB Industrial hot air Dryer Product Table: