Home  >  Construction Machinery  >  Building Material Machinery  >  Brick Making Machinery

1.Block molding cycle: 35-50 seconds, 2.Manual operation, 3.Only can produce need three people - details see: https://www.machineto.com/on-sale-popular-hongying-qmj4-35a-concrete-road-edge-block-making-machine-10076179

Hongying QMJ4-35A Manual Brick Making Machine

1.Main description:

A vibrator is equipped on the upper mold and two vibrators on lower mould. Exciting force from three different directions makes the blocks better quality.

For this cement block machineQMJ4-35A, spring buffer pressuring is adopted and the wear-down is reduced. It is quick in product shaping, high in product density, and large in pressure. Just after demoulding, the blocks can stand a person’s weight. Because of low cost, cement block machine QMJ4-35A is the ideal selection for customers.

The workshop area is 40-60m2, and it needs about 3 workers to operate this machinery. The office and the stacking area are arranged according to your specific condition.

2. Capacity of Main Products:

Item	Size(mm)	Pcs/Mold	Pcs/Hr
Hollow Block	400×200×200	3pcs	320
	400×150×200	5pcs	400
Solid Brick	240×115×53	21pcs	1680
Porous Block	240×115×90	9pcs	720

3. Main Technical Specifications:

Dimension	1150×1250×1700mm
Pallet Size	880×450×25mm
Molding Time	35-55 S
Power	4.8KW
Weight	0.6T
Mixer	JD350
Rated Voltage	380V/240V/220V

Applicable materials:

sand,gravel and cement. Fly ash, slag, steel slag, coal gangue, ceramsite, perlite and other industrial waste can be added.

Products category:

all kinds of bricks, such as exterior wall brick, interior wall brick, tracery wall brick, floor block, dike dam block, and interlocking road blocks and roadside stone block.

Application:

widely used in construction, road, square, hydraulic construction, garden, etc.

The block molding machine typeQMJ4, 35Awhich isdeveloped and produced by our factory is the kind offixed type, mold vibrations and mechanical stripping.It has been proved by customers after long-term use that its structure is reasonable, the design is novel and the outstanding characteristics as follows:

Functions and features:

1, It uses the belt pulley to drive chain demoulding and has the advantage of low consumption, which is only 1.5 kw.Actions of vibrating, forming and demoulding after charging are finished by the reversing switch on the machine successively. The operation is simple and convenient.

2, The bodyis made through strong square steel welding. So it has strong resistance to vibration and performs stably.

3, The mould box adopts four-column sliding, which works compactly and lifts stably, so block forming rate is greatly increased.

4, Pressure head realizes displacement, so it is convenient for molding box to distribute material. It also greatly improves production efficiency.

5, Lifting part of the mould box installs limiting stopper to avoid the damage of mold in the process of running.

6, The machine realizes vibration of upper part, forepart and rear part at the same time, so walls around the mold box bear equal forces. This can make the blocks realize high compactness and beautiful edges so as to achieve the best molding effect.

7, Flat-mouth style 350 forced mixer and lorry are produced synchronously with this machine.

Because of the characteristics above, blocks produced by this machine have high strength, can be stand on immediately after demoulding and can stack in a short time, so it can save cement 5-10%. The size is precise and edge is neat. It is one of the ideal models in our country at present.

This machine realizes less investment, great adaption to all kinds of aggregate and fully use of local materials,so it is the best choice for individual, partnerships and the construction unit .