Home  >  Metal Processing Machinery  >  Machine Tool Equipment  >  Lathe

1. Oil country lathe, 2. Pipe thread cutting lathe, 3. Spindle bore: 360mm, 4. Swing on bed: 1000mm, 1250mm, 5. Tapering: +/-1:4 - details see: https://www.machineto.com/oil-country-lathe-pipe-thread-cutting-lathe-10128142

Oil Country Lathe(Pipe Thread Cutting Lathe)

Features:

This lathe meets the special requirements of users in the petroleum, geological, mining and chemical industries, and in agricultural irrigation and drainage, it is able to cut various straight and taper pipe threads of union joints, drill rods, casting pipes, drain pipes, well castings and water pump pipes more economically and efficiently as compared with the engine lathe, however, it may serve as an engine lathe to cut various metric, withworth and module threads, shafts and disks. After all it is an ideal machine for the petroleum, mining geological, chemical and agricultural industries

1. The machine is equipped with a tapering unit which can work out a ±1:4 taper

2. The machine is able to cut both metric and with threads without changing the translating gear.

3. The dripping worm in the apron can protect the mechanisms of the lathe automatically.

4. The guide way is hardened and finely finished.

5. The great power of the machine is competent at heavy load and power cutting

6. The floor center rest can be moved freely as required by the user. The center rest is provided with an adjustable clamp unit for long pipes, greatly reducing intensity of labor.

7. The 4-jaw head stock offers free clamp of both short and long pipes.

Specification		Q-360
Max. Swing over bed		1000mm, or 1250mm
Max. Swing over carriage		640mm, or 900mm
Distance between two centers		1500mm, 2000mm, 3000mm, 4000mm, or more
Width of bed		755mm
Diameter of spindle inner hole		360mm
Min. Clamped diameter of chuck		240mm
Range of spindle speed		6.3 to 315r.p.m. with 18steps
Main motor power		22kw
Kind of metric thread and pitch range		56kinds, 1 to 120mm
Kind of whitworth thread and range		37kinds, 30 to 1.125teeth/in.
Kind of modular thread and range		46kinds, 0.5 to 60mm
Kind of radial thread and range		46kinds, 0.5 to 60 d.p. With 4 way toolpost
Tool section ( H×W )		45×45mm
Max. Travel of tool post		300mm
Max. Travel of cross slide		695mm
Rapid traverse of tool post	Longitudinal	3740mm/min
	Cross	1870mm/min
	Up tool post	935mm/min
Diameter of tailstock sleeve		160mm
Travel of tailstock sleeve		300mm
Taper for taper hole of tailstock sleeve		metric no. 80
Machining length of taper scale		300mm
Taper turning		±1:4

Standard Accessories:
4-jaw manual chuck with steel body, dia. of 1000mm, 2 sets
Steady rest (fixed steady), range 50 to 590mm with bearing type, 1 set
Follow rest (traveling steady with tips), range 50 to 220mm 1 set
Cooling system, 1 set
Lighting device, 1 set
Taper turning device, length 300mm, 1 set
Living center, 1 set
Dead center, 1 piece
Center sleeve, 1piece
Set of machine operating tools