Home  >  Apparel & Textile Machinery  >  Textile Machinery  >  Cloth Cutting Machines

Nonwoven fabric embossing and folding machine1.High speed;, 2.Precise folding & cutting size;, 3.Easy operation;, 4.Low noise - details see: https://www.machineto.com/nonwoven-fabric-embossing-and-folding-machine-10273390

Nonwoven fabric embossing and folding machine

Main introductions:

1.410mmfolding machine sizes:about3.9*1.15*1.75m(L*W*H).

2. It can process: a. spunlace nonwoven; b. chemical-bonded nonwoven; c. needle-punch nonwoven; d. airlaid paper, etc.

3. The performance of the machine:
A.embossing

B. folding;

C. cutting, use band-saw to cut the folded cloth which has neat cutting edges; D. Pneumatic counting, You can set the number which you want;

E. speed can be adjusted by stepless speed adjusting device;

F. The machine can finish basic folding ways such as:1/4, Z, Netc.

4. The working table of the machine uses thicker iron board. The wheel of band saw has been technically processed. Enwrap the special cloth on the surface of this wheel to lower the noise.

5. The tail shelf of the machine installs the broad-strap synchronous transferring device to control the tension of the cloth.

6. Producing speed: about350pcs/min.This machine can adjust the tension according to different types of nonwoven fabrics.

7. The folding rollers use Chinese good quality 45# steel. The plywood use good quality stainless steel. The middle of the machine uses screw rod to adjust the windage of the nonwoven fabric which can finish many kinds of foldings. The tail of the machine uses double brackets to make the machine more stable.

8. Axletrees use Chinese good quality 45# steel. The machine has automatic shaping knife and automatic counting functions.( a. lower the noise of counting; b. enlarge the radian of the slip pieces under the folding rollers to lower the noise; c. the device use double transferring devices and gears positioning to make the folding more stable; d. easily change the band-saw knife; e. controlling board uses stainless steel; f. use imported band-saw knife).

9. Axletrees use Chinese good quality 45# steel. The distance from the band-saw knife to the tail of the machine is about 0.8m.

10. Use transducer to adjust the speed of the running. Total power is3.5kw.The electronic device has reasonable wire fixing and easily operation.

11. The whole machine is made of international standard steel and iron. Use rust-preventing paint to brush the surface of the device. All the bedplates of the machine must use rust-preventing paint. Frame of the device had good jointing and the size is precise. Bracket is fixed strongly. Strap wheel, gears and all the driving parts are centrosymmetric. The main gears are easily adjusted to promise the stable running of the device. We offer 3 years quality guarantee for the main parts of the machine (except the human reasons).