Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Mineral Separator

Froth flotation machines:, 1.ISO certificate, 2.low comsumption, 3.high separation ratio, 4.durable structure - details see: https://www.machineto.com/nickel-ore-froth-flotation-machines-10315154

Nickel ore Froth flotation machines

I. Froth flotation machine Introduction:

Flotation machineis applicable for separating non-ferrous metal, black metal, noble metal, non-metal mineral, raw body and materials of chemical industry, which are subject to coarse separation, swept separation, fine separation and flotation, so the useful ore are reclaimed.

II. Froth flotation machine Features:

The Flotation Machinehas the advantages of large air-absorption capacity and low energy consumption. Every cell owns three functions: air absorption, slurry absorption, and flotation separation, and the cells form a floatation separation loop by itself without any auxiliary equipment, and is allocated horizontally, which favors the change of flow. The circulation of mineral slurry is reasonable, and can avoid the disposition of coarse sand to the largest extent. There is self-control device on the surface of mineral slurry, so it is easy to adjust it. The impeller has backward-inclined upper and lower vanes, which produce upper and lower circulation of mineral slurry respectively.

III. Froth flotation machine Application:

Flotation machine is applicable for the separation of nonferrous metal and ferrous metals, such as fluorite and talc. The impeller is driven by V-belts, which can bring the centrifugal effect to form negative pressure. While extracting sufficient air to mix with ore pulp, the machine stirs ore pulp and mixes it with chemicals to form mineralized froth. By adjusting the height of the flash board to control the liquid level, the useful froth can be scraped from the loam board. The height of the strobe must be adjusted carefully to keep the stabilization of liquid level and scrape the mineralized froth to the launder. The impellers and stators should be kept at a distance and should be changed when worn. The bearing in the pump should be maintained every three months.

IV. Froth flotation machine Technical parameters:

Model		XJK-0.35	XJK-0.62	XJK-1.1	XJK-2.8	XJK-5.8
Effective volume (m3)		0.35	0.62	1.1	2.8	5.8
Production capacity (m3/min)		0.18-0.4	0.3-0.9	0.6-1.6	1.5-3.5	3-7
Rotation speed (r/min)		470	400	330	280	240
Blade diameter (mm)		300	350	500	600	750
Motor model	Rotor	Y90L-4	Y100L2-4	Y132M2-6	Y160L-6	Y200L2-6(255M-60)
	Scraping plate	Y90S-4	Y90S-4	Y90S-4	Y90S-4	Y90S-4
Motor power	Blade motor	1.5	3	5.5	11	22(30)
	Scraping plate motor	1.1	1.1	1.1	1.1	1.5
Weight (t/single trough)		0.43	0.86	1.38	2.33	3.533

Note:The technical parameters above are just for your reference. If there is any change, all parameters and overall dimension are subject to operating instructions. Any questions please feel free to contact us.

HenanYuHui Mining machinery Co., Ltd. owns 20-year experience. Products are sold home and abroad. Our fine service has been accepted by our foreign customers. Welcome new and old customers to visit and negotiate.