ENGINE POWER
At flywheel 65 HP

OPERATING WEIGHT
With 6.00-16 front tyre, 14.9/13-23 rear
tyre, hydraulic lift with three point linkage
system cat 1-2 at square type
fender with flat top. 2070 kg

ENGINE
FIAT 8035.05
4-stroke diesel engine direct injection
Number of cylinders :3
Bore and stroke :104 x 115 mm
Piston displacement :2,931 cc
Max torque at 1500 engine Rpm. :(216 NM (22 kgm)
Distributor type Fuel injection pump
Dry-type cylinder liners
Cooling system :water
Three-row brass tube and copper fin radiator
Force-feed lubrication system.
Distributor type injection pumps with
mechanical speed governor.
Oil-bath air Cleaner
Vertical exhaust muffler, Hand and foot accelerator

CLUTCH
Dual plate, dry-type with separate controls
(pedal for transmission and hand lever for
PTO)
Diameter of plates :11”

SPEED (km/h)
With 6.00-16 front tyre and 14.9/13-28 rear tyre

FORWARD 1st creeper* 2nd creeper* 3rd creeper* 4th creeper 1 st low 2 nd low 3 rd low 4 th low 1 st high 2 nd high 3 rd high 4 th high Reverse Creeper* Low High *Optional

0.9 1.4 2.1 2.8 3.0 4.5 6.6 8.6 10.9 16.3 25.0 35.0 1.4 4.3 15.6

TRANSMISSION
Gearbox: 8F +2R speeds
Gearbox with constant – mesh gears
Synchromesh on 3rd, 4th, 7th and 8th
Speed, Double control lever
Differential with mechanically operated
Look, spur gear final drivers.

BRAKES
Service: disc type, oil bath mechanical
control, simultaneous or independent
operation
Parking: dependent, operating on service
brakes, with hand control lever and flashing
warning light.

FRONT AXLE
Telescopic type, inverted U section
Variable treat with heavy duty box section
type front axle support

STEERING
Hydrostaticpower steering
with independent circuit
Turning radius:
-with brakes: 3,000 mm
-without brakes: 3,800 mm

POWER TAKE OFF
Fully independent:
1-3/8th 6 splineshaft, 540 rpm at 1970 Engine rpm

TYERS (Parkina Of Tyre )
Front: 6.00-16
Rear 14.9/13-28

TREADS
Front (5 positions):
1,410-1,510-1,610-1,710-1,810 mm
Rear (6 positions):
11400-1,500-1600-1700-1800-1900 mm

HYDRAULIC LIFT
Lift-o-matic, automatic, With draft, position and
mixed control, Draft control through the top link.
Pump capacity 34.5 L/min. (Max.) Relief Valve
opening pressure, 190 kg/cm2 automatic lifting and
lowering device. Lowering speed adjustment
and transport lock,
lifting capacity, 2200 kg.
Auxiliary control valves (single and double
acting) with 1/2” quick couplings.
*Optinal

DIMENSIONS
(WITH 6.00-16 AND 14.9/13-28 TYRES)

ELECTRICAL SYSTEM
Voltage : 12V
Starting motor : 4 HP
Alternator : 400 W
Battery : 110/120 Ah
Starter safety switch
Cold staring-aid device thermostat*
High-low beam headlights.
Parking, direction, stop lights.
Multiple gauge instruments panel
Rear floodlight
2-Pole power connectors*
*Optional

BODY
With “square” hood, fully forward tilling
for max accessibility

DRIVER SEAT
Deluxe,, with parallelogram suspension
and hydraulic shock absorber, adjustable
to driver’s weight, reach and height

CAPACITIES
Fuel tank: : 61.01
Engine oil sump and filter : 7.311
Rear transmission and
hydraulic lift : 30.11
GENERAL FEATURES
Efficient and automatic hydraulic system with
latest technology of liftomatic
Excellent fuel consumption
Heavy duty oil Cooled disc brakes
Adjustable and comfortable driver seat
Hydrostatic power steering
Tip up engine hood for maximum access to
engine service points
Heavy duty front axle support
Advance and more visible instrumental panel

OPTIONAL
AC Cabin, Canopy, Towing hook, Swinging Draw bar, Cold Starting aid, Front weight, High Clearance Kit, Low Clearance Kit, DTO pump applications and Creeper gear etc.