Home  >  Wood Working Machinery  >  Woodworking Machinery  >  Carbonization Stove

new design Carbonization Furnace/Charcoal Stove/carbonization stove, 1.newly design, 2.high output - details see: https://www.machineto.com/new-design-carbonization-furnace-charcoal-stove-carbonization-stove-0086-13703827012-10340903

new design Carbonization Furnace/Charcoal Stove/carbonization stove//0086-13703827012

Process:

1.One Carbonization Furnace could match with 2-3 inner pot to enlarge the capacity 2-3 times.

2.For each inner pot, from the briquette into charcoal, it takes about 6-8hours.

3.After carbonizing the first circle,the inner pots will put out and cooled outside. Then putting another inner pots into the furnaces.

4.Only to ignite the first furnace, and the airflow produced by it will be enough to supply the next furnaces. During this process, no smoke is released, and the hot air can use recycled which is a good way to save time and energy.

5.And the furnaces are equipped with the lifting crane which can help you to put and discharge the inner pots and charcoals easily. This is the largest capacity and new technology furnace for briquettes.

1.This machine is used to carbonized the half-product into finished product.

1.It is equip-ed with hyperploid high temperature steam cooling system, and the process of cooling can be accelerated to speed up the period of the production.

2.Carbonization furnace is a stove used to change biomass briquette into charcoal briquette.

3.The quality and efficiency of kiln affect final forming of charcoal briquette greatly.

4.This furnace is ideal equipment for wood briquettes to have anoxic distillation carbonization. Due to its rational structure

5.the furnace only needs small quality of heat consumption.

some questions:

ASK: 1. How does carbonization stove make charcoal?

Answer:

The surface of wood (bamboo, wood briquette, nut shell, etc) will ignite spontaneously in the hypoxic condition. And this spontaneous combustion will produce heat. This heat and the external heat source will heat the stove at the same time, when the temperature reach 280 degree, the chemical structure of the wood will be changed by the high-temperature, and after long time heating, changing and decomposing, then we will get the black charcoal, combustible gas, and wood tar. This model furnace will use the fume extraction tube to recycle all the combustible gas and smoking from the entire heat source.

2.Why it is no pollution ?

Answer:

1. Smoking purification system are used for purify the smoking (can not burning) and filter the wood tar. The smoking through the purification system will become water vapor, and it will not pollute the air.

2. When during the process of carbonizing, there will be some smoke.(can be burning) the smoke can return to the furnace through tube for purifying, after purification , the combustible smoking can be flow into the heating room of the main furnace for heating the stove again,

if you are interested in this machine,please contact me: