NEW 2 IN 1 SMD REWORK+SOLDERING STATION_ IRON 60W (LF-0691)

1.High-quality resistance good for long service life, low noise., 2.Microcomputer control, warms up quickly, and so does cooling - details see: https://www.machineto.com/new-2-in-1-smd-rework-soldering-station-iron-60w-lf-0691-10135782

Place of Origin:Guangdong China (Mainland)	Brand Name:EBAYSZ	Model Number:LF-0691	Input Voltage:220V
Output Power:60W	Port:Shenzhen

NEW 2 IN 1 SMD REWORK+SOLDERING

STATION_ IRON 60W

BEST-898D+ double LED display 2 IN 1 intelligent leadfree hot air gun

with helical wind+ solder station-double LED display desolder station +solder iron

This one better than 898D

Uses better transformer Better components & more features

1.Blue digital LED displays for Both rework and soldering station.

2.Manual / Auto Switchable for Rework Operation.

3.The air flow and temperature with control keypad.

4.899D+ works great, size makes the unit easy to transport.

Two new features for the gun and iron.

1. GUN manual and Auto

*Put the key to AUTO: When you put the gun on the holder over 2 minutes, that the gun will enter the standby mode.

*Put the key to MANUAL: When you put the gun on the holder, that the gun still work along

2. IRON

The blue key would set up 2~20minutes.

*If you set up 2minutes, when you put the iron on the holder after 2minutes that the iron will enter 200c .

*If you not set up the minute that iron will keep the temperature along with your using.

*SMD rework station Headpiece

Main functions:

1. High-quality resistance good for long service life, low noise.

2. Microcomputer control, warms up quickly, and so does cooling.

3. Handle with sensor switch, the system will turn into the working mode while the handle is held; and the system will standby while the handle is put on the holder, which is very convenient and Energy Save.

4.Suitable for SOIC , CHIP , QFP ,PLCC , BGA , Heating Shrink , Drying , Lacquer Removal , Ice-Out , Pre - Heating and other temperature - sensitive components .

5.Closed circuit Sensor , microcomputer zero-crossing soft touch temperature control, LED visual display , high power , rapid rise of temperature , accurate and stable temperature , little influence of air outflow , and unsoldering without lead.

6. Be able to operate individually, work independence.

7. LED digital display accuracy 1 °C.

8. Wind volume and temperature are adjustable, suitable for many kinds of use .

9. Using silica gel line good for long use.

10. Assemble design, saving space and cost.

11. CE approved.

PRODUCT SPECIFICATIONS:

1.MODEL: +899D 2 in 1 SMD Rework + Soldering Station

2.VOLTAGE: 230V

3.POWER DEPLETION: 700W

4.TYPE OF PUMP & AIRFLOW: Brushless fan with soft air

5.AIR FLOW: 120L per minute

6.TEMPERATURE RANGE OF HOT AIR GUN : 100 to 480 Degrees Centigrade

7.POWER FOR SOLDERING IRON : 50W

8. SOLDERING IRON HEATER : Ceramic Heater

9. TEMPERATURE RANGE OF SOLDERING IRON : 200 to 480 Degrees Centigrade

10.OUTPUT VOLTAGE : 24V AC

mso-table-layout-alt:fixed;
padding:0.0000pt 5.4000pt 0.0000pt 5.4000pt ;

MODE	Rated Voltage	Power Consumption	Air Pump	Air Flow	Temp.Control	Length of Handle	Noise
898D+	AV110V/220V 50Hz/60Hz	700w	Soft airflow	120L/min(Max)	100°C-450°C	120cm	45db