multiple effect distillation equipment
Place of Origin:Hebei China (Mainland) | Brand Name:GUANYU | Model Number:LD2000-5 | Application:Liquid |
Type:water distiller | Used For:Pharmaceutical preparations & Injection water | Saving Energy:Saving coal, saving steam,saving pure water | Water Conditions:Water quality high, fast water |
Distilled Water Quality Control:Automatic control by intelligent instruments | Water Quality:Water conductivity<0.6us/cm, endotoxin<0.125Eu/m |
1.Made from quality stainless steel.
2.The Stainless Steel multiple effect distillation is used for pharmaceutical preparations and injection water
3.Distilled water production Outflow Capacity: 300L/H,500L/H,1000L/H,2000L/H,3000L/H.
4.Saving steam and water, Water quality high,water fast,distilled water quality auto control
5.Steam and water, using separated four time separation technology, to ensure distilled water heat source and endotoxin content lower.
Multi-effect water distiller machine LD2000-5
Product Brief Introduction
Guanyu tube multi-effect water distiller machine is Guanyu equipment companies rely on the company's own comprehensive strength, combined with Finland‚the United States‚Italy and so on at home and abroad advanced technology, and cooperated with the domestic famous steam expert Professor Lin Zaiqi of the Dalian University of Science and Technology (domestic multi-effect distilled water machine inventor), R & D production of high-tech products.
Product Structure
The product consists of 5 evaporator, 5 pre-heater, 5 vapor-liquid separator, 2 condenser, feed pumps, filters, control valves, flow meter, frame, piping and controller.
1.Evaporator
Using tube falling film evaporation technology,to ensure Reverse Osmosis Water(Pure water)uniform distribution in the inner wall of each evaporation tube to form a water film evaporation.
The effect of pure steam for the next evaporator to provide heat, its complete evaporation, liquefied form distilled water.
2.Vapor-liquid separator
Using steam and water split four separation techniques(Steam and water centrifugation, underneath rotary vane clapboard separation, wire mesh capture water droplet separation, upper rotary vane clapboard separation) to ensure distilled water heat source and endotoxin content lower.
3. Preheater
Using U-tube exchange heat, high heat exchange efficiency, good mechanical performance, long service life.
4. Condenser
Unique double condenser design, special made multiway reciprocating structure,heat transfer fully, no need special cooling water, distilled water can reach the required temperature
5. Piping
Pipeline design has no storage, no dead ends, low equipment failure rate, pipeline to connect using new type sanitary clamp connection both inside and outside mirror polish,neat appearance,operate quickly and conveniently.
6. Configuration
Adjusting valve,Automatic compensation valve,throttle valve,conductivity meter, temperature meter selected domestic and overseas high-tech products, Beautiful appearance, complete functions
7. Water Source
The equipment required the water source must be pure water or reverse osmosis water, any natural water or city water is infeasible.
Advantages
1.Saving Steam
Steam savings, efficient use of coal resources, saving rate above 20%.
2.Saving Water
No need additional cooling water, save your precious Pure water (Reverse Osmosis Water) resources.
3. Output water High quality
The produced water quality conductivity < 0.6us/cm, (GB<=2us/cm); bacterial endotoxin <0.125Eu / m, (GB<=0.252Eu / m)
4. Output water fast
After open the machine 5 minutes, immediately produced qualified distilled water.
5.Distilled water quality Automatic control
Intelligent Instruments continuous digital display the outlet conductivity of current distilled water, and can set the value of qualified conductivity.
Automatic switching emission unqualified distilled water.
Usage
The equipment apply to large, medium and small pharmaceutical companies to produce the Medical Pharmaceutical preparation water,water for injection and so on, all levels of hospital preparation room, or chemical research institutes.
Technical parameters
Model Parame No. -ters Classification | LD300-5 | LD500-5 | LD1000-5 | LD2000-5 | LD3000-5 |
Distilled water Yield (L/H) | 300 | 500 | 1000 | 2000 | 3000 |
Steam Pressure(Mpa) | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 |
Pure water (Reverse Osmosis Water)Consumption(L/H) | 330 | 550 | 1100 | 2200 | 3200 |
Steam Consumption(Kg/H) | 60 | 100 | 200 | 450 | 680 |
Purified water Quality(MΩ.cm) | 1 | 1 | 1 | 1 | 1 |
Multi-stage Pump Power(kw) | 0.75 | 0.75 | 1.1 | 1.5 | 2.2 |
Dimensions(mm) | 700X1500X2450 | 700X1500X2450 | 850X1850X2500 | 1000X2200X2800 | 1200X2400X2800 |
Packaging Detail:Fumigation wooden box or as required |
Delivery Detail:45-60days after receiving the deposit |