Motor Graders

Motor Grader, 1.High efficiency and good quality, 2.Auto control system, 3.ROPS/FOPS cabin, 4.Electrical monitoring - details see: https://www.machineto.com/motor-graders-10117760

Place of Origin:Henan China (Mainland)

Brand Name:Exway

Model Number:All models

Motor Grader-Standard Motor Grader

Salient Features
1. Our standard motor grader is highly efficient and of good quality.
2. Its backward opening engine cover is made of glass-fiber reinforced plastics.
3. The driving axle of this standard motor grader uses an automatic control system for lubrication and oil temperature regulation.
4. It is enhanced by incorporating an imported multi-way valve, braking valve, and liquid filling valve.
5. It has a very strong rear frame, a traction frame and moldboard steering mechanism.
6. This standard motor grader has a spacious ROPS/FOPS cabin.
7. It is equipped with a shock absorbing seat and newly designed panel.
8. Electrical monitoring device
9. This heavy equipment machine also has a non-freon air conditioner.

Main Technical Parameters

Specifications			Unit	Values
Operating Mass	Front Axle		kg	4580
	Rear Axle		kg	11820
	Total Mass		kg	16400
Diesel Engine	Model			C6121
	Rated Power		kW/hp	162/220
	Rated Revolution		r/min	2200
Overall Dimensions	Standard	L × W × H	mm	8980×2600×3470
	With Optional Parts	L ×W × H	mm	10876×2600×3470
Wheel-base	Front Axle to Rear Axle		mm	6290
	Middle Wheel to Rear Wheel		mm	1553
Tread Width			mm	2150
Steering System	Max. Front Wheel Steering Angle		(°)	±45
	Max. Articulated Wheel Steering Angle		(°)	±20
	Min. Turn Radius		mm	8400
Moldboard	Length		mm/ft	3960/13
	Height (Arched Length)		mm	650
	Max. Tilt Angle		(°)	90
	Rotating Angle		(°)	360
	Cutting Angle Adjusting Range		(°)	42~73
	Max. Lift above Ground		mm	410
	Max. Digging Depth under Ground		mm	440
	Max. Shoulder Reach (Left/Right)		mm	1440/2090
Scarifier (Optional)	Scarifying Width		mm	1250
	Max Scarifying Depth		mm	280
	Number of Teeth Shanks		Piece	11
Rear-mounted Ripper (Optional)	Max. Digging Width		mm	2000
	Max. Digging Depth		mm	315
	Number of Shanks		Piece	5
Bulldozer (Optional)	Width		mm	2740
	Height		mm	920
	Max. Dozing Depth		mm	205

1. Working cycle time is equal to the sum of the raising time of the swing arm, the descending time of the swing arm, and the rolling time of the bucket.
2. All machines are subject to actual products. We reserve the right to make changes to configuration and specification of our products without prior notice due to the continuous technical improvement of EW construction machines.