Home  >  Industrial Supplies  >  Industrial Filtration Equipment  >  Other Industrial Filtration Equipment

1.Excellent corrosion resistance, 2.Excellent resistance to stress-corrosion cracking, 3.Mesh: 0.5-250 Thickness: min 0.05mm - details see: https://www.machineto.com/monel-mesh-filters-for-dyeing-chemicals-for-the-textile-industry-manufacturer-10229549

Monel Mesh Filters for Dyeing Chemicals for the Textile Industry ( Manufacturer)

Heanjia Super-metals Co., Ltd. suppliesMonel Mesh Filters for Dyeing Chemicals for the Textile Industry.Monel Mesh Filters for Dyeing Chemicals for the Textile Industryis corrosion resisting, such as resistant to sea water and steam at high temperatures, resistant to salt and caustic solutions. Meanwhile, it exhibits characteristic like high strength.

Chemical composition (%)

	C	Mn	S	Si	Ni	Cu	Fe	Al	Ti
Monel 400	0.30 max	2.00 max	0.024 max	0.50 max	63.0 min	28.0-34.0	2.50 max	-	-
Monel K-500	0.25 max	1.5 max	0.01 max	0.50 max	63.0-70.0	Remainder	2.0 max	2.30-3.15	0.35-0.85

Physical and Mechanical Properties

	Monel 400	Monel K-500
Melting point (ºC )	1300-1350	1316-1348
Hardness	125-190	-
Tensile strength ( M/Pa )	550-950	638-1366

Specification

Wire Mesh

GB/T 5330.1 ; GB/T 17492 ; JB/T 9155

0.5-250 mesh/Inch; Thickness: Min0.05mm

Characteristics

1. Particularly resistant to hydrochloric, sulfuric and hydrofluoric acids when they are de-aerated
2. Excellent resistance to neutral and alkaline salt
3. Resistance to chloride induced stress corrosion cracking
4. Good mechanical properties from sub-zero temperatures up to 480-1020ºF
5. From pure water to non-oxidizing mineral acids, salts and alkalis
6. Excellent resistance to high velocity sea water
7. Resistant to a sour-gas environment
8. Non-magnetic alloy

Applications

1. Marine engineering
2. Chemical and hydrocarbon processing equipment
3. Gasoline and freshwater tanks
4. Crude petroleum stills and Crude oil distillation towers
5. Boiler feed water heaters and other heat exchangers
6. Valves, pumps, shafts, fittings, and fasteners
7. Oil well industry
8. Sour-gas service applications
9. Doctor blades and scrapers

Manufacture Process

The manufacture of mesh is started with producing wire. The wire production includes: forging, rolling, annealing and drawing. The wire with right material and wire diameter will be produced. Then the warp wires will be put and prepared on the weaving machine, and then start weaving. From wire to mesh, manufacture process is operated with high standard quality control system. There will be quality test for each batch of product, such as test to diameter tolerance, content, mesh aperture, etc.

Packing Process & Transportation

Packaging: Seal up, with plastic inside and wooden case or carton outside; or according to the customer's requirements.

Transportation: By air or By sea

Other Terms

Minimum Order Quantity	Manufacture Period		Payment Terms
100 KG	10-15 Days (Small Quantity)	20-40 Days (Mass Quantity)	L/C, T/T, Western Union