Home  >  Industrial Supplies  >  Industrial Air Conditioners

Modular Chiller (Four systems), Model:LAWHTM, Cooling capacity:60kW-102.5kW, Heating capacity:66kW-108.5kW - details see: https://www.machineto.com/modular-chiller-four-systems-10223393

Modular Chiller (Four systems):

Model LAWHTCMM60T		Unit	60x1	80x1
Cooling
Nominal cooling capacity*		kW	60	80
Cooling
Nominal heating capacity**		kW	65	89.6
Hermetic compressor
Type		/	Scroll
Nº of compressor/system		nº	2/2	2/2
Cooling power input *		kW	10.2x2	14.9x2
Heating power input **		kW	11.2x2	16.4x2
Step controls		%	0-50-100 (Single unit)
Axial fan
Air flow		m3/h	28000	33000
Rated power×Quantity		kW x nº	0.55x2	0.55x3
Evaporator
Type		/	Tube in Tube heat exchanger (Shell and Tube is optional)
Water flow (Tube In Tube)		m3/h	10.3	13.8
Water flow (Shell and Tube)		m3/h	10.3	13.8
Water side pressure drop***		kPa	49	49
Water connection size		DN	125
Refrigerant
Type		/	R407C
Charge quantity		Kg	9×2	12×2
Type		/	3GSD
Charge quantity		ml	3000×2	8100×2
Electrical
Power supply		v/ph/hz	380V/3H/50HZ
Max. power input		kW	21.5x1	31.45x1
Max. input current		A x nº	43.2x1	62.9x1
Max. starting current ****		A	138	196.8
Overall dimensions
Length	U type coil	mm	2090(Single unit)
Width		mm	1200 (Single unit)
Height		mm	1900 (Single unit)
Net weight	U type coil	Kg	670x1	1020x1
Gross weight		kg	690x1	1040x1
Sound pressure	U type coil	dB(A)	69	69
level *****

FEATURE

STRUCTURE
The master module can work independently or together with up to 7 slave modules, cooling capacity from 60 to 868kW.

HERMETIC COMPRESSOR
3-phase scroll type compressor, with built-in thermal overload cut-out and crankcase heater, mounted on rubber vibration dampers.

AXIAL FAN
External rotor type axial fans, equipped with three phase direct drive motors, low noise 8 poles, protection level IP54, provided with a protective outlet grille.

EVAPORATOR
Evaporator built with high efficiency tube in tube type heat exchanger, factory insulated with flexible close cell material.

CONDENSER
Condenser built with seamless internal screw thread copper tubes mechanically expanded into blue wave hydrophilic aluminum fins.

REFRIGERANT CIRCUIT
Refrigerant circuit complete with charge valves, filter drier, sight glass, gas-liquid separator, thermostatic expansion valve, high & low pressure switch. The heat pump unit is completed also with 4-way valve, liquid receiver and one way valve

HYDRAULIC CIRCUIT
Hydraulic circuit built with galvanized pipe, complete with water discharge connection for tube in tube heat exchanger and flange type hydraulic connectors in two directions easy for connections from both sides of the units.

ELECTRIC PANEL
Electric panel consist of: Compressor contactor, fan motor contactor, compressor protection breaker, fan protection breaker, phase sequence relay and microprocessor with function display (display only for master/packaged unit)
Automatic operation dramatically reducing maintenance cost thanks to reliable microprocessor system.

OPTIONAL
Paddle flow switch;
Metallic filter for hydraulic circuit;
Water pump;
Rubber anti-vibration mounting...