Model DXD4-2.8/1 electrolytic tin-plating machine

1.Used to plate Tin over copper wire surface., 2.Good quality - details see: https://www.machineto.com/model-dxd4-2-8-1-electrolytic-tin-plating-machine-10161339

Place of Origin:China (Mainland)

Brand Name:Shanghai Engineering Machinery Factory of The Navy .China

Model Number:DXD4-2.8/1

Model DXD4-2.8/1 electrolytic tin-plating machine

contact supplier for Model DXD4-2.8/1 electrolytic tin-plating machine

Type DXD4-2.8/1 electrolytic tin-plating machine is used to plate Tin over copper wire surface.It is researched and designed by Shanghai Electric Cable Research Institute (under SECRI), especially for the production of round copper wire.

This machine is available of advantage: tinned products of good quality, tin saving,energy saving,low cost, and execllent working condition,etc. The production of this machine is semi-finished wire provided to the high speed drawing continuous annealing and take-up line for producing the finished wire or direct production of tinned products. This tin coated wire has good welding property.

It has available of receiving waste-gas, waste-water, so it is an ideal property of “non-waste” exhausting machine. The machine has power unit which is available of thyristor controlled rectifier, fault indicator, wire speed plating current follower, SCRD.C speed drive unit.

Required by customer, we can supply the bull-cell test plant by which testing the quality of the plating liquid and stannometer with full integrated circuit numeral display.

Required by customer, we can also provide the technology software of tin plating, the formula of pre-condition liquid and tin plating liquid,testing analysis etc.

Technical specifications

Wire diameter range(mm)	2.8~1.0(soft wire);2.0~1.0(hard wire)
Coating thickness max(µm)	15
Current density max (A/dm²)	50(typical 35~40)
Wire speed max(m/min)	180(typical 40~140)
Plating current max(A)	1200
Plating voltage max(V)	9
Total installation capacity(KVA)	30
Water consumption(1/min)	6
Gas consumption(1/min)	450(6bar)
Specification of pay-off and take-up unit(spooling)	size(mm):pnd 400/630 the max capacity(kg):500
Specification of pay-off and take-up unit(stempack)	size(mm):1250×500×1500 the max capacity(kg):1200
Overall dimension of the machine(M)	15×4.2×2.6