Mineral processing gold shaking table mining machine

gold shaking table mining machine, 1.glass fiber reinforced plastics, 2.high recovery, 3:in stock, 4.packing:iron sheet - details see: https://www.machineto.com/mineral-processing-gold-shaking-table-mining-machine-10082281

Place of Origin:Jiangxi China (Mainland)	Brand Name:HENGCHANG	Model Number:6S	gold shaking table mining machine:heng chang
test:supply	application:gold mining	warranty:1year	installation:our engineer guiding
after-sale service:lifelong	operation:easy	spare parts supply:whole using life	quality:good
type:various

gold shaking table mining machine

1. 6-S shaker was one of the main equipment of gravity, it is widely used in sorting tungsten, Tin, tantalum, niobium, gold and other rare metals and precious metals ore.

2. Be used for roughing, selected, different jobs such as scavenging, separation of coarse sand (2-0.5mm), fine sand (0.5-0.074mm), slime (-0.074) different grain size. Can also be used for sorting iron, manganese ore and coal. When dealing with tungsten, tin ore, and so on, shaking the effective recovery of particle size in the range 2-0.22 mm.

3. Shakes bed of dressing process is in has complex section of tilt bed surface Shang for of, mine grain group from bed surface Shang angle of to mine slot into, while by to sink supply transverse washing water, so mine grain in gravity, transverse water very well and, bed surface for reciprocating does not symmetric movement by produced of inertial and friction of role Xia, by proportion and grain of tiered, and along bed surface for longitudinal movement and along tilt bed surface for transverse movement.

4. Therefore, the proportion and size of different particles along their direction of movement gradually from a to b while fan-shaped shed, respectively, different areas of the port from concentrate and tailings discharge, was eventually divided into concentrate, middlings and tailings. 6-s Shaker with rich ore ratio, high separation efficiency, the guarding easy, easy to adjust the stroke. Changing landscape gradient and stroke can still maintain a bed running balance spring placed within the box, compact, and be able to arrive at a final concentrate and then the final tailings.

1. This Shaker is mainly by the bedside, motor, speed slope, bed, mineral bath, sink, reflex, and the lubrication system, composed of eight parts. Vertical reciprocating motion of the bed is implemented through the crank and connecting rod type transmission mechanism.

2. Motor driven by belt drive pulley of crankshaft rotation, rocker made with upper and lower movement, rocker when moving down, toggle plate drive rear axle and reciprocating rod moves backward, spring is compressed.

3. Bed through the linkage and the reciprocating Rod connected, so at this point so that the bed back campaign, when rocker upward movement, as a result of the tensile strength of spring driven bed does the forward motion.

4. Before facing the bed during the campaign, is the angle between toggle plate change from big to small, toggle plate ends of horizontal movement velocity changes from small to large.

5. So the bed of forward movement that is slow and fast, whereas in the bed back, by fast and slow and cause a linear movement, this guarantees that the materials to move forward on the bed, and by specific gravity separation. Bed shape is right-angle trapezoid, on wooden frame, wooden planks along the diagonal (and skew of 45 degrees to the axis) into the plane. Ash painted carved Manger bed bed bed face and rubber in two ways.

6. Paint grey carved Manger bed face used for sorting fine mud, rubber is used for sorting coarse ore bed. Used to select the slimes the Shaker face along the vertical 0.5 degree down tilt, used for sorting sand shaker in vertical 1-2 degrees of tilt, ends up in concentrate.

7. Vertical adjustment of gradient by size on the supporting mechanism of bolt. Bed with shake support supported in adjusting slope on the body. Supporting so that the bed shake in vertical plane for the arc before and after the ups and downs of reciprocating motion.

8. Shake the support channel fixed on the Control Panel, when you use your wheel by adjusting screw to adjust the seat when turning on the saddle, you can adjust the bed dip.