Home  >  Food & Beverage Processing Machinery  >  Food & Beverage Machinery  >  Food Sterilizer

Microwave Sterilization Machine, Chilli,Black Pepper,Cummins, PLC CONTROL, Tunnel Type(Continuously), 10KW-80kgs/h 12KW-100KGS/H - details see: https://www.machineto.com/microwave-sterilization-machine-spices-wb-10-2010-exported-to-turkey-10035888

Microwave Sterilization Machine

(TEFLON BELT)

I.The Requirment of Clients:

1.Item Sterilized:chillis powder

2.Type of Feeding:Continuous

3.Type of Control:PLC AutomaticII.

4.Service Capacity :80kgs per hour

The Features of Design:

1.Transmission System:a. In the transmission system, it applies frequency-converting control of speed, worm gear reducer.b. The conveyer belt is Teflon Belt,special for microwave, width 450mm.c. The deviation of belt is adjusted with Hand-movement.

2. The body of the Tunnel

a.The body of the microwave tunnel is made of 304 Stainless Steel, thickness 1.5 mm.

In side there is one set of Humidity extraction system to extract the humidity after heating.

b. To be safe, there is Automatic Power-off device while open the door of the machine.

c. The protecting case of Magnetic-pipe and transformer is made of 1.2mm SUS304.

On top there is one set of Heat extraction system to extract the heat energy generated by working of machine.

d.The frame of machine is made of carbon iron pipe 40*60mm.

e.One set of infrared thermometric is installed at the outlet of the tunnel to measure the temperature.

3.The controlling system

a. On the outside panel there are frequency converting speed controller, emergency stop button, Start, Stop buttons,

b. All the controlling components will be installed into one controlling box, which is at the entrance of the machine.

c.Siemens PLC controlling systemd.The microwave power can be adjusted by choosing in the display text.

e. Every microwave source is an independent unit.If one is broken, the machine will not be prevented from runnig. f. Every magnetron has an overheating protection device.

Main Specification
Frequency	2450±50MHz
Rated Input Power	≤14KVA
Microwave output Power	≥10KW (Adjustable)
Voltage Power Supply	Line to line 220V±5%,60Hz,
Speed Transmission Belt	0-1.5m/min (Adjustable)
Microwave Tunnel Chamber Measurement	1600*700* 500 mm
Microwave Suppressor in the outlet	1200*700*80
Microwave Suppressor in the inlet	1200*700*80
L*W*H of Tunnel body	1600 *700 * 500mm
Overall dimension of whole machine	5200*1100*1900
The length of entrance & exit for transmission	600mm
The width of convey belt	400mm
The tunnel made of	304# Stainless Steel
The frame made of	Carbon iron rectangular pipes
Client’s requirement	5 thermometers on the microwave tunnel body