Home  >  Industrial Supplies  >  Motors  >  DC Motor

These gearmotors are Micro metal gearmotor with extended/back shaft. - details see: https://www.machineto.com/micro-metal-gearmotor-with-extended-back-shaft-10237282

These tiny, highquality motors are intended for use at 6 V with extended shaft 4.3mm or 10 mm.
In general, these kinds of motors can run at voltages above and below this nominal voltage,
so they should comfortably operate in the 3 – 9 V range.

Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor.
All of the micro metal gearmotors have the same physical dimensions,but they come in a wide range of gear ratios—from 5:1 up to 298:1—and let you choose between two different motors:high-power (HP) and standard.
This means you can choose the version that has the ideal blend of speed, torque, and current-draw for your particular application.

These gearmotors are a miniature (0.94" x 0.39" x 0.47"), high-quality, high-power motor with metal gearbox, similar to Sanyo’s popular 12 mm gearmotors. These units have a 0.365" or 9.27mm long, D-shaped output shaft,and the brass faceplate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35 mm thread pitch).
It weighs approximately 0.35 oz (10 g).