Home  >  Raw Material Processing Machinery  >  Plastic Raw Material Machinery  >  Plastic Mixer

1. heating cooling mixer unit, 2. High mixing and productivity, 3. fomula,technical, production service - details see: https://www.machineto.com/mg-functional-heating-cooling-mixer-unit-10338797

General Introduction

MG heating cooling mixer unit

is characterized by high mixing precision, and wide application to food, chemical industries, and building lines. The major sections of a mixer are barrel, ribbon agitators, feeding ports, discharging port and driven unit.

Double ribbon mixer drive the material from two ends to centre through the help of the outer ribbon, while the inner ribbon push the material from centre to two ends, thus, material achieve a high mixing effect at short time!

Features:

1. widely used in the mixed powder, granular, flake, block, such as materials in the feed, food, chemical, fertilizer , consttruction and other industries.

2. Specially -designed discharger has big door-opening angle an quick discharging with less residue.

3. Sealing system has good tightness, ensuring no products leakage.

4.Users can choose carbon steels and stainless steels.
5. can be equipped with heating or cooling jacket if temperature control is required. Besides, all of our powder mixer can tolerate about 10% liquid additives! We will add spraying or atomizing unit inside the tank!

Standard configuration:

1. Drive Unit: Cycloid reducer or gear reducer

2. Motor brand: China brand (customized)

3. Gear box brand: Chinese Famous brand

4. Bearings: Chinese Famous brand

5. Discharging valve: pneumatic flap valve (no dead angle when mixing).

6. Main Shaft Seal
7. Air-purged seal and stuffing seal for powder material

8. Mechanical seal for liquid material

9. Voltage and Hz

380V 3Phases 50hz or in accordance with it in the using place

10. Top Cover
Could be fully open so as to clean, with safety grid and limit switch to make sure safety operation for workers

11. Normal duty type: start the mixer first and then load the material

heating cooling mixer unit

Additional configuration:

1.Driven unit: Many worldwide famous brands are for option: SEW, ABB, Siemens and so on

2. Bearings: NSK/TNT and so on

3. Heating/cooling jacket

4. Spraying system

5. Heavy duty type ( loading your material into the mixer first and then start the mixer)

6. Platform: we build the platform for you or we design it and you build it locally

7. Mixing system: including packing machine, bucket elevator, Sieve, screw conveyor and so.

8. Customizing according to client's specific requirement