Home  >  Construction Machinery  >  Building Material Machinery  >  Glass Production Machinery  >  Glass Processing Machinery

glass making machine, 1.high-sensitive heating 2.high qulity3.power saving 4.more impact resistance5.more bending resistance - details see: https://www.machineto.com/mf-dq1632-3t-through-horizontal-flat-glass-making-machine-10331003

MF-DQ1632-3T through horizontal flat glass making machine

SPECIFICATIONS

I. Technical Performance :

The performance of the product described in the following text conforms to that made of the high-quality float glass specified by national standards in GB11614-1999 Float Glass.

Note: (1) The thickness of glass should be ≥2.85MM

(2) Four-side edges of the glass should be ground by diamond wheel until being beveled. No hole or chamfers are allowed.

1. Maximum area of glass sheets array: 2.85MM - 19MM 2000MM × 4000MM

2. Minimum size of glass for processing: 100MM × 250MM or φ250MM

3. Maximum size of individual glass sheet for processing:

2.85 MM 600MM× 1000MM

3 MM 800MM× 1200MM

4-6MM 2000MM× 4000MM

8-19 MM 2000MM × 4000MM

Clearance of glass sheets array: longitudinal ≥50mm; transverse ≥20mm

4. Thickness of glass for processing: 2.85 - 19 mm

5. Maximum area of glass for processing: 8 square meter per tempering cycle

8 square meter per glass sheet

6. Production Rate: high-quality float flat glass specified by GB11614-1999, four-side edges ground. No holes or chamfer are allowed.

Thickness 2.85 3 4 5 6 8 10 12 15 19

No. of tempering

cycle per hour 25 22 18 15 13 10 7 5 3 2

Note: The productivity may be reduced by 10-30% in the following cases:

a. When the length of an individual piece of glass exceeds 3050mm;

b. For low-E glass; and

c. For glasses of other special size, processing requirement or performance

7. Yield Rate: 97% (for high-quality float flat glass specified

by GB11614-1999, with four-side edges ground, and no holes nor chamfers)

Pictures of the part:

Sample:

Model mm	Max mm	Min mm	Glass thickness mm	Capacity m2/h
MF-DQ1325-3T	1300x2500	120x250	2.85-19.0	48
MF-DQ1332-3T	1300x3200	120x250	2.85-19.0	62
MF-DQ1342-3T	1300x4200	120x250	2.85-19.0	80
MF-DQ1632-3T	1600x3200	120x250	2.85-19.0	75

Characteristics: the flat tempered glass is widely use as architecture safety glass,the solar panel glass,and observation window

for industrial furnace or when there is safety connected when use glass. tempered glass can be used to make

isolation glass and laminating glass to apply for diffeent purpose