Home  >  Metal Processing Machinery  >  Metal & Metallurgy Machinery  >  Metal Coating Machinery

Ji Li Jia Metal Surface No.4 Top Polishing Machiness ares are used to obtain the finishing No.3 and No.4. - details see: https://www.machineto.com/metal-surface-no-4-top-finishng-polishing-grinding-machines-10162124

Metal Surface Finishing Solutions

The conpect:

Ji Li Jia Metal Surface No.4 Top Polishing Machines are used to obtain the finishing No.3, ("coarse polishing", with abrasive grains from G60 to G150) and No.4 ("fine polishing", abrasive grain from G180 and beyond). Ji Li Jia Metal Surface No.4 Top Polishing Machines can be applied to the top surface of coils and sheets.

The concept is even more flexible as the single modules can be combined together with or without an intermediate space, allowing to choose the proper balancing between intermediate inspection points and line compactness.

By usingJi Li Jia Metal Surface No.4 Top Polishing Machines Customers can benefit from:

- Reduced operational costs

- High productivity rate, up to 40 m/min

- Abrasive belt replacement in just few minutes

- Same abrasive belt for both top and bottom modules

- Spare parts standardization and optimization

- Easiness of capacity expansion following the demand

- Easiness of use, by means of improved touch panel.

Technical Data for typical configurations. Other configurations are available on request.

MODEL	JGD	JGS
No. of working units	1 unit	2 units
Useful widths	700 - 800 - 1000 -1300 - 1600 - 2100 mm
Thickness range	0.4 - 3 mm
Feeding speed	Adjustable up to 40 m/min
Contact roll diameter	300 mm – Covered with rubber
Abrasive belt width	Up to 700 - 800 - 1000 - 1600 - 2150 mm (depending on width)
Abrasive belt length	2500 mm
Speed of abrasive belt	18.3m/s
Machine weight	4.500 - 8.600 kg	5.000 - 10.000 kg

EASINESS OF USE

Essential parameters and an innovative graphical user interfce (GUI) grant an extraordinary easiness of use.

The capability of saving,recalling and interchanging the working parameters reduces even more the setup and start-up time of the new line.

FRAMES& MATERIALS

Ji Li JIa uses only first choice materials from ISO 2000 certified companies.

All frames are made of electro welded steel. They are stress reliieved. sanded, prime, coated, spray silver oil and pained.

MOTORS

High efficiency motos from Siemens

Feeding speed is controlled by AC motprs and frequency controllers.

Installes powers in accordance with the job to be performed

CONTROL & INTERFACING

PLC from Simens or other imported brands

Easy to ues graphical user interface with TFT operator panel

ELETRIC CABINET

Main swich for insulation from the main line power

The cabine is manufactured in disconnectiong section for easy transport

Full cooling or conditioned

Pneumatic Plant

Located on module backside for fully accessbility

Emergency tank

Lockable inlet, monometer and pressure adjustment

Note: data referred to workinh width of 1600mm grinding machine of the production line

JI LI JIA MACHINERY CO., LTD.

NO.17, HONGYE ROAD, XINJIAO INDUSTRIAL DISTRICT,

DALIANG TOWN, SHUNDE DISTRICT, FOSHAN CITY,

GUANGDONG PROVINCE, P.R. CHINA

TEL. +86 757 22221767 22211774

FAX. +86 757 22211767

WWW.GD-JILI.COM

OVERSEAS SALES OFFICE

TEL. +86 13702603541

FAX. +86 757 22211767

AFTER-SALE OFFICE

TEL. +86 757 22221767

FAX. +86 757 22211767