Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Drying Equipments  >  Dry Cabinet

1.high automatic running, 2.low consumption, 3.low noise,little poll, 4.high energy saving - details see: https://www.machineto.com/mesh-belt-dryer-for-synthetic-rubber-from-zhengzhou-keda-10288248

Mesh Belt Dryer For Synthetic Rubber From Zhengzhou Keda

1.The main principles of mesh beltdryer:

The principle is as follows:laid evenly on the mesh belt ,driven by the transmission device ,the materials move back and fore in the dryer ,where hot wind passes through the materials and the water vapor is discharged from the weep hole ,so as to achieve the purpose of drying .The dryer is composed of standard sections ;to save space ,the dryer can be made in multi layers ,and the common structure includes three layer with two rooms and five layer with two rooms ,with 6-40m length and 0.6-3m effective width.

delivery picture:

2.structure of mesh belt dryer:

drying machine head, drying section, tail, belt, gear, inlet pipe, outlet pipe (hot air source with separate).

3.Heat source:

steam, thermal oil, natural gas hot air furnace facilities.

4.application of mesh belt dryer:

Widely used in sheet.,strips,granular materials, such as wood chips, dehydrated vegetables, diet pellets, MSG, coconut, synthetic rubber, carbon black,ect.

5.Advantages of mesh belt dryer:

(1)small space to take;

(2)low investment;

(3)high efficency;

(4)large output and high evaporation strength ;

(5)standardized production;

(6)can adjust the amount o air ,heating temperature,residence time and feeding of material speed;

(7)device flexibility;

(8)Most of the airrecycling,highenergysaving;

(9)ensure consistent of productquality;

(10)ISO9001:2000;

fitting picture

6.Main technical parameter:

Model		DW-1.2-8	DW-1.2-10	DW-1.6-8	DW-1.6-10	DW-2-8	DW-2-10
Nu of element		4	5	4	5	4	5
Tape width m		1.2		1.6		2
Drying lengthm		8	10	8	10	8	10
Thickness mm		10-80
Temperature oC		50-120
Steam pressureMpa		0.2-0.6
Steam consumption Kg/h		120-130	150-375	150-375	170-470	180-500	225-600
Heat aream2		272	340	352	440	448	560
Drying timeh		0.2-1.2	0.25-1.5	0.2-1.2	0.25-1.5	0.2-1.2	0.2-1.5
Drying strengh Kg water/h		60-160	80-220	75-220	95-250	100-260	120-300
Number of fans		5	6	5	6	5	6
Power of fanskw		9.9	12.1	9.9	12.1	18.2	22.2
powerkw		11.4	13.6	11.4	13.6	19.7	23.7
Dim	L m	10.05	12.05	10.05	12.05	10.05	12.05
	W m	1.5	1.5	1.91	1.91	2.33	2.33
	H m	3.15	3.15	3.15	3.15	3.65	3.65
Weight Kg		4800	5780	5400	6550	6350	7800

7.Sale promise

Before sale:

(1) Selection of equipment type.

(2) Design and manufacture products according to the special requirement of customers.

(3) Training technical personnel for customers

(4) Send technicians freely to users for site planning, optimal design process and scheme.

During sale:

(1) Acceptance check of products.

(2) Assist customers in drafting construction plan.

After sale:

(1) Appoint specialized after sale service staff to users for installation and debugging.

(2) Install and debug the equipment.

(3) Train operating personnel.

Zhengzhou Keda Machinery Equipment Co.,Ltd,which is specialized in producing dryer and crusher.Twenty years ago,cooperating with German Institute for dryer.The dryer is a mature product at the moment,and achieved ISO9001 certification.