Home  >  Raw Material Processing Machinery  >  Plastic & Rubber Machinery Parts

Mechanical filter regulator lubricator for bag making machine - details see: https://www.machineto.com/mechanical-filter-regulator-lubricator-for-bag-making-machine-10335331

An installation

* Please note that when cleaning installation connecting pipes and fittings, avoid dirt into the gas line .

* Please note that when installing the gas flow direction and the direction of the arrow on the body are the same , take note and joints tooth type is correct.

* Filter , pressure regulator ( regulator filter ) and to the oil cooler fixed ; fixing brackets convex body groove and groove matching , and then fixing plates and screws can be.

* Alone regulator, filter regulator fixed ; rotating the locking ring with the special lock tab .

Two . Water discharge ( filter )

* Filter with manual drain drainage differential pressure in two ways .

* Manual drain : When the water level reaches the bottom of the filter holder must be drained before .

* Automatic drain : When the water level reaches a quarter cup of water will be discharged automatically .

Three . Pressure regulator ( regulator, regulator filter )

* When turning the rotary knob before pulling up and then rotate , push the rotary knob for the position .

* Rotate knob clockwise to increase outlet pressure , rotate the left lower outlet pressure.

* Adjust the pressure should be gradually transferred to the required pressure evenly and should not step adjustment in place.

Four . Approach to the oil and fuel adjustment ( lubricator )

* Used JIS K2213 transmission oil mist (ISO VG32 or equivalent oil ) . Please do not exceed the amount of fuel eight full cup .

* The number 0 is the smallest amount of oil , nine of the largest oil , numbers aligned point → arrow direction ; from 9-0 position can not be rotated to be clockwise.

V. Precautions

* Some parts use PC material is prohibited near or in an organic solvent environment. PC cup washed with a mild detergent .

* Do not use pressure over 9.5kgf/cm ⊃2; (0.95Mpa).

* Other details, please refer to product samples .