Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Mine Drilling Rig

Well Machine:, 1 Max Depth:200m, 2 Max Diameter:300mm, 3 Area Occupancy:1m2, 4 Max Height Of Stand:3.5m - details see: https://www.machineto.com/max-depth-200m-max-diameter-300mm-2013-hot-sale-well-machine-10313004

2013 Hot Sale Well Machine:

1 This small drilling machine occupies a small area ( 1square meters), a height of 3.5 meters

stand, the job can be installed in less than ten minutes.can be used at indoor and outdoor site.

2 Can be disassembled, after dismantling ,the total length is less than 2 meters, the largest

component is no more than 40 kg.Can be load on a vehicle as it is very light.

3 The well pipe is fully enclosed, shallow layer has no leakage, can ensure the health and safety

of drinking water.

4 The drills has rock breaking ability. can drill 30 meters per hour. The deepest hit is 200 meters,

can pierce the hard rock accompanied by a diamond bit.

5 Research and Develop by ourself,itbreaks difficult problem that easy to drill and hard to disassemble.

6 All the lifting, loading and unloading drill pipe is mechanized, time-saving, labor-saving and easy to operate.

The Max Drilling Depth	200 m
The Max Drilling Width	300 mm
Main Machine Power	4.55 kw
The Power Of Driving Motor	1.25 kw
The Power Of Lifting Motor	1.1 kw
The Power Of Submersible Pump Motor	2.2 kw
The Drilling Pipe Rotation Speed	150 r/min
The Area Of Working Platform	1 M2
The Max Height OF Well Stand	3.5m
Maximum weight of a single piece after dismantling	40 kg
Maximum length of a single piece after dismantling	2 m
The Size Of Case1	1100X450X450mm
The Size Of Case2	670X670X450mm
The Entire Weight Of Machine	200kg
The Number Operating Person	2

FAQ Of Water Well Drilling Machine:

1What is drilling Tip?

-----It is the drilling bit at the end of the drilling pipe,it can decide the diameter of thewell.The material is diamond three-wing rock drills,the diameter of tip is 7cm,11cm,22cm ,we can customize the diammeteraccording toyour requirement.

2 What is drilling Pipe(pole)?

-------It deccides how deep you can drill a well,the material is galvanized steel.

Its ID(interner diameter) is 38mm,OD(outer diameter) is 42 mm.

3 Why do you use a transformer?

-----The motor used is electrical Direct Current,we will configure a voltage transformer to change the alternating current to 60V direct current.

The driving force of direct current is strong enough for the very hard soil,it also can protect the operator in case of electricity leakage.

Direct Curret is more stable and safe,the lifting strength is also more than the Alternating Current.

The transformer can turn 220V or other voltages Alternating Current to 60V Direct Current.

4 Can we use a 220volts motor for a direct use without a transformer? If no,why?

We do not advise you to use 220 Volts directly,there are two reasons:

----First:220V alternating current is not stable,and the driving force is not as strong as the direct current.Sometimes you will meet the very hard soil,so you had better use the 60V direct current.

----Second:in case of the electricity leakage,220V voltage has more harm than 60V.

5 What is the suction water pump?

------With the high pressure,Itisused to draw the sand,soil and other residues out of the well,and can clean the well after the well is finished.

6Worry about unsupporting local voltage or no electricity in the wild?

We can configure a correspondinggasoline generator

Gasoline Generator
Model	GF-3
Output Power	6.5 kw
Output Voltage	220v/110v
Phase	Single
HZ	50 /60
Oil Tank Capacity	25 L
Displacement	420 cm3

Mart Industry,6 Year's Reliable Machine Supplier

We Can Go Much Further,As We Are Professional

Welcome Your Enquiry!We Are 7X24 Hours Here For Your Service