Home  >  Raw Material Processing Machinery  >  Rubber Raw Material Machinery

Manual hose crimping machine/Manual pipe locking machine, Crimping Force:187T, crimping diameter;aa6aaaa 32, Weight:100kg - details see: https://www.machineto.com/manual-rubber-tube-locking-machine-manual-hose-swager-10340039

Manual hose crimping machine/Manual pipe locking machine

JKS-200 Hose crimping machine is a portable type of machine which is simply designed and convenient for operating and carrying. It takes manual pump of extra high pressure as power source. So it’s much suitable for the outdoor work and production of without electric power.

Technical data

1,Specifications: JKS-200

2,Hydro-cylinder pressure: 187T

3,Displacement of oil pump: 30 ml

4,Hydraulic oil: Summer:YB-N46

Winter:YB-N32

5,Crimping range: φ6——φ32mm

6,Weight: 100 kg

7,Volume: 600×500×370mm³

Operation of JKS-200 Hose Crimping Machine

1. Release the pole (3) by the handle (random accessories), set the dies one by one, according to the number and clean the awl surface and flange. Put the side with letter foreword. Please make sure that the diemarchesthe hose: the inner diameter of hose is the size mm of die.

2. Screw up the valve (10), and then tighten (7).

3. Lift (8) to put it on and then put down it. Repeat this movement and pay attention to the changing of the Pressure gauge (6) until it reaches 16.5MPa.The maximum pressure for swage should not pass 20MPa.

4. After swaging the hose, please revolve (10) and (7) in contrary direction. Then the dies will be released automatically. Take the swaged hose out.

5. Clean the machine after working and cover it with the plastic shelter.

Packing list

Please contact me freely if you are interested in .

Waiting for our early cooperation .