Home  >  Food & Beverage Processing Machinery  >  Food & Beverage Machinery  >  Beverage & Wine Processing Machinery  >  Sterilizer

It is a liquid material for high-temperature sterilization or pasteurization of the ideal equipment. - details see: https://www.machineto.com/manual-plate-sterilization-unit-plate-type-pasteurized-steam-sterilizers-10030910

Manual plate sterilization unit (plate type whole set sterilizing equipment)

Bactericidal mechanism of plate unit is based on the laws of thermodynamics: "Heat always pass by the hot object to cold objects spontaneously, there is temperature difference between two fluids, there are bound to transfer the heat, " there is temperature difference between the two fluids in forced convection Thermal process, because the heat transfer surface with corrugated corrugated board structural optimization, the heat exchange rate has reached 92%, even quasi-fluid flow in the Reynolds number below, fluid movement in the plate was also found between the three sports, to promote fluid The formation of severe turbulence, heat transfer efficiency to reduce the boundary resistance.

Plate sterilization unit is designed for dairy products, fruit juices, drinks, beer, or similar materials designed for liquid sterilization equipment, materials through the sterilization and cooling to extend the shelf life of the ideal equipment for the purpose. The device can be connected homogeneous machines, separators, degassing, flash and other equipment. Its output mainly by the feeding system to regulate the flow controller in homogeneous mode with full flow, the use of heterogeneous machines to control the flow.

For the plate heat exchangers, sanitary centrifugal pumps, material balance bucket, hot water systems (including heat tank, heat pumps, water heaters), the control system control components are brand-name products, including industrial PLC programmable controller and screen, pneumatic Three return valves, piping systems, support frame and other components to form the overall structure. Plate heat exchanger for preheating the composition according to process requirements, homogeneous (uniform not included in this complete set of equipment), sterilization, thermal insulation, cooling and other multi-stage process composition. Other valves and pipe fittings and other fluid accessories selected high quality standards for all products.

Production capacity	0.5-20t/h
Sterilization temperature	85-95 °c (holding time :15-300S, heat medium temperature:> 90-100 °c)
	120-135 °c (holding time: 4S, heat medium temperature:> 140 °c)
Control mode	Manual, Semi automatic, Automatic