Manual linear and curved edge banding machine MFS503(T)

1. both curved or straight panels, 2. viable speed 0-10m/min, 3. worktable can rise & fall, also tilt to 45 degree, 4. Patent - details see: https://www.machineto.com/manual-linear-and-curved-edge-banding-machine-mfs503-t-10323751
Condition:NewPlace of Origin:Shanghai China (Mainland)Brand Name:YUTONModel Number:MFS503(T)
Voltage:380V/50Hz/3PDimension(L*W*H):1100*800*1100mmWeight:230kgWarranty:one year
After-sales Service Provided:Engineers available to service machinery overseasMain color:whiteLogo:YutonCompany Certificate:ISO 9001
Material:Medium-cardon steel   
Manual linear and curved edge banding machine MFS503(T)
contact supplier for Manual linear and curved edge banding machine MFS503(T)


Manual linear and curved edge banding machine MFS503(T)

Manual linear and curved edge banding machine MFS503(T) can band both linear and curved panels manually.

1. Glue box is on worktable, we got patent for this.

Advantages of glue box on worktable:

1. without glue leakage

2. the glue come from up to down, it will not precipitate and residual.

3. easy to clean.

4. easy to add oil to decrease trouble.

2. worktable can be tilt to 45 degrees.

3. with fine adjust to make the belt banding to full panel side.

4. belt length can be couted automatically.

Model:MFS503/ MFS503T

1. Glue box

2. End cutting function(optional)

3. worktable tilting

4. banding length counting

Parameter:

Belt Thickness0.3-3mm
Belt Width15-50mm
Min. Board Radius20mm
Belt Feed Speed0-10m/min
Belt materialPVC, Melamine
PowerAC380V, 50Hz
Motor140W, AC220V, 50Hz
End cutting motor (for 503T only)250W, AC380V, 50Hz
End cutting saw (for 503T only)
External diameterΦ110mm
Internal diameter20mm
Saw width3mm
Heater motor1.5KW (6x250W)
Max. heating temperature250
Electromagnetic valveDC24V
Air supply volumn0.1m3/min
Air supply pressure0.7Mpa
Environmental temperature≥0o
Humidity≤90%, no condensed water
Air speed<5m/min
Noise≤70dB
Overall dimension1100*800*1100mm
Net weight (MFS503)176kg
Net weight (MFS503T)185kg
Packingwood packing

End cutting function is optional:

Model MFS503 is without end-cutting function,

Model MFS503T has the end-cutting function.

Working Process:

Working procedure: put belt into machine, push board along direction-guide block. When board touches the limit switch, it will start feed belt, and smear holt-melt adhesive on it. When board passes direction-guide block, while limit switch is off, the machine will stop feed belt and cut it off. Push the board hard to pass the adhesive-roller group, and the belt will stick on its surface, then the board will pass the auxiliary compression-roller group to enhance the stickiness of the belt-banding. Thus the whole machining is finished. You can remove the compression-roller group, if used for curved surface edge-banding. MFS503T is equipped with end-butting device, which can cut off the extra belt on the two-end of the board. This machine is usually used together with MX503 double edge trimming machine.

Manual linear and curved edge banding machine MFS503(T)
Packaging Detail:pp foam paper/ plywood crates. 2sets/crate or 3sets/cratewooden case size: 1100*800*1100mm(MFS503) 1200*900*1280mm(MFS503T)
Delivery Detail:10-30 days

Related Product for Manual linear and curved edge banding machine MFS503(T)