Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Mineral Separator

magnetic separator for wet separtion - details see: https://www.machineto.com/magnetic-separator-for-concentrating-ore-10315559

magnetic separator for wet separtion

Application:

Permanent Cylindrical Wet Magnetic Separator
Permanent cylindrical wet magnetic separator is used for wet separation of ferromagnetic minerals and non-ferromagnetic minerals. It can work continuously with its large working clearance, good magnetic depth, and strong processing capacity. Its working principle is that when the pulps enter the magnetic zone, the ferromagnetic minerals are absorbed at the wall of the cylinder. The weekly magnetic and non-magnetic minerals are then swung off. Thus, the ferromagnetic minerals and non-ferromagnetic minerals are separated by this permanent cylindrical wet magnetic separator.

Working Principle of Magnetic Separator

When the pulp flows to the tank in the magnetic separator, the mineral granules spreads under the impact of the water flow from the show pipe. As a result of the magnetic force, the magnetic minerals concentrate as a lump or a chain. This lump or chain is then absorbed on the cylinder owing to the magnetic force. When the magnetic lump or chain rotates with the cylinder, gangues and other non-magnetic minerals falls off from the lump or chain and are then discharged with the pulp. The lump or chain left at the wall of the cylinder is ore concentrate. It is then discharged off from the magnetic separator with water.

Technical Specification:

(1) CTB Megnetic Separator

Model	CTB600X1200	CTB600X1800	CTB750X1800	CTB900X1800	CTB1050X2400	CTB1200X3000	CTB1500X3000
Magnetic field strength (oe)	1450	1500	1550	1800	1800	2000	2000
Capacity (t/h)	8-15	15-25	30-45	35-60	60-95	80-150	120-200
Motor power (kw)	1.5	2.2	3	4	5.5	7.5	11
Weight (kg)	910	1340	2050	3000	5020	7800	9600