Home  >  Metal Processing Machinery  >  Machine Tool Equipment  >  Machine Centre & Parts  >  Machine Centre

CNC machining center (machining center ,vertical machining center),CNC milling machine high precision;good qulity and high p/c - details see: https://www.machineto.com/machining-center-10129883

CNC vertical machining center

The use of machine and scope:

This series of vertical machining centers and CNC milling machine using single-beam, longitudinal lathe bed, Cross slide, headstock and the work piece with a tool cooling system which can achieve high-speed, high-feed processing. The whole tool machine adopt fully enclosed protective shield. Machine can be attached automatically chip flow chain. X, Y, Z coordinates use of the three sliding rail grinding of hardened, highly rigid contacts, and affixed with TSF soft belt. The static and dynamic coefficient of friction is small which increase the loading capacity and distortions, enhancing the stability of the machine. It also has the characteristic of fast response with low-speed and does not crawl. Coordinate all adopt imported high-precision pre-allocation stretching ball screw, of which both end with fixed supporting. The screw and lead rail was lubricated by automatic Diluting oil lubrication agencies. Triaxial all use imported without Backlash flexible coupling Straight Alliance, the main configuration use Siemens CNC system, but it can also be selected according to users needs.

Specification		VM500	VM750	VM850	VM1060
item	Units	specification	specification	specification	specification
X/Y/Z axis travel	mm	500/350/400	700/420/500	800/500/500	1000/600/600
X/Y/Z guide form		Hard track	Hard track	Hard track	Hard track
Table area	mm	350*800	480*1100	500*950	600*1300
T-slot size	Number of trough*width	3*18	5*18	5*18	5*18
Table load	Kg	300	600	800	1000
Spindle taper hole	#	BT-40	BT-40	BT-40	BT-40
Spindle speed	Rpm	6000	8000	8000	8000
Distance from spindles end to table	mm	125-525	160-660	160-660	150-750
Spindle motor specifications	Kw	5.5/7.5	7.5/11	7.5/11	7.5/11
X / Y / Z-axis rapid feed	m/min	12/12	18/18	18/18	18/18
Triaxial Cutting feed	mm/min	1-4000	1-5000	1-5000	1-5000
X / Y-axis motor specifications	kw	1.5/1.5	2.0/2.0	2.0/2.0	2.0/2.0
Z-axis motor specifications	Kw	1.5	2.0	2.0	2.0
Positioning accuracy	mm	±0.008	±0.008	±0.008	±0.008
Repeat positioning accuracy	mm	±0.004	±0.004	±0.004	±0.004
Pressure needs	Kg/cm2	≥6	≥6	≥6	≥6
Numerical control system	Siemens802C 802D/Guangtai numerical control/Huazhong numerical control
Weight	kg	3000/3200	4500/4700	6000/6200	8000/8200
Size	mm	2200*1800*2500	2550*1985*2575	2700*2200*2600	3100*1985*2700