Home  >  Metal Processing Machinery  >  Machine Tool Equipment  >  Bending Machines

1.Anti Creep Setting, 2.Adjustment For Material Thickness, 3.Hydraulically, 4.13 individual segmented clamps, 5Automatic control - details see: https://www.machineto.com/machines-to-cut-and-bend-iron-flat-iron-bending-machine-box-and-pan-folder-10123292

Key word: machines to cut and bend iron/flat iron bending machine/box and pan folder

Specifections

Item	Model	WS4X2500	WS5X2000	WS4X3100
Floding length mm		1000	1000	1000
Floding thickness mm		0.5-4.5	0.5-5	0.5-5
Model Size	L mm	3500	3100	3600
	W mm	1000	1000	1000
	H mm	1500	2000	1500
Weight kg		4000	3000	3600
Main motor kw		5.5	5.5	5.5

• Machines to cut and bend iron/flat iron bending machine/box and pan folder for 4mm x 2450mm (8ft) ( Also available 3metres x 4mm mild steel)
• Hydraulic Clamp and unclamp from foot switch.
• Final Clamping ofMachines to cut and bend iron/flat iron bending machine/box and pan folder is limited to 10mm increments for safety
• Fingers are high carbon steel, Apron blade high carbon tensile steel 20mm and segmented both are hardened and ground for repeat accuracy.
• 24 Volt to foot switch. Overload protected
• Clamping ofMachines to cut and bend iron/flat iron bending machine/box and pan folder provided by 2 rams, oil delivered through steel pipes. Hydraulic clamping of top beam with 13 individual segmented finger clamps.
• Unclamp is controlled, to allow the operator to regulate the open height.
• Apron bed of Machines to cut and bend iron/flat iron bending machine/box and pan folder is segmented 11 individual adjustable segments for return fold down of 50mm suitable for splash backs & TDF etc.
• Automatic and manual control. In auto cycle after clamping start auto apron will come up to angle programmed, apron will return and the head will unclamp by foot pedal control
• Safety trap bar on apron
• Motor 7.5Kw
• Length – 3.5 metres
• Width – 1 metre
• Height – 1.5 metres
• Weight – 4ton

Structural & Operating Features

ü Hydraulically operated bending and clamping beam for efficient heavy duty operation

ü High structural rigidity from heavy plate steel box construction with continuous welded seams

ü Bending beam ofPanbrake machine/press brake/manual sheet metal bending machinepowered by dual hydraulic cylinders.

ü Fully integrated and enclosed electric/hydraulic system with large oil reservoir to maintain low oil temperature.

ü Powerful hydraulic pump provides rapid operation with timer for bend angle

ü High load capacity dual spherical plane bearings utilized at bending beam pivots and over-center clamp bearings

ü Precise electric/hydraulic controls with manual inching of bending beam

ü Comprehensive equipment protection from electric and hydraulic overload systems