Home  >  Industrial Supplies  >  Motors  >  Other Motor

1.rotisserie motor, 2.pass ISO9001 certification, 3.10 years mold experience, 4.delivery on time and fast - details see: https://www.machineto.com/m4-rotisserie-motor-10238190

Present Product information

Product name	Product No.	Material	Dimension	Weight	Surface treatment
M4-rotisserie motor	NY--0244	Aluminum	20*12*13cm	800g	nature

What is you care about,maybe they are.

MOQ:1000die

Mold life:normally 80000die

Payment:For mold pay the 50% after design confirm,pay the remain after sample confirm

within 1-3days since receive;For casting product pay 50% after sample confirm,pay the remain before delivery.

Delivery time :in general about mould for 20-30days,about casting product for 10-30days.

Overall product information
Material	ADC12 , ADC10, AL6061,AL6063or others
Available the weight of product	From 0.005kg to 25kg
Applied software	PRO/E, Auto CAD , UG,
Secondary processing	CNC turning,lathe machining, Drilling, tapping, over sand,
Surface Treatment	Plating, Sandblasting, oil Painting, Powder Coating,Anodizing
Products application	Office equipment parts ,Motor Parts,Furniture Parts,Light fittings,Communications equipment ,etc
Available service	Mold manufacturing, zinc\ aluminum production, product processing (drilling, tapping, remove burr lathe machining) Surface treatment: powder, fuel injection, electroplating, oxidation, sand blasting
Package	Cartons, wooden boxes or others
Delivery	Mold manufacturing time:20 to 30days, die casting production time: according to the steps and complexity of product processing, and the size of the order.

What’s Die casting
Die casting is a metal casting process that is characterized by forcing molten metal under high pressure into a mould cavity. The mold cavity is created using two hardened tool steel dies which have been machined into shape and work similarly to an injection mold during the process. Most die castings are made from non-ferrous metals, specifically zinc, copper, aluminium, magnesium, lead, pewter and tin based alloys. Depending on the type of metal being cast, a hot- or cold-chamber machine is used.
The casting equipment and the metal dies represent large capital costs and this tends to limit the process to high volume production. Manufacture of parts using die casting is relatively simple, involving only four main steps, which keeps the incremental cost per item low. It is especially suited for a large quantity of small to medium sized castings, which is why die casting produces more castings than any other casting process.Die castings are characterized by a very good surface finish (by casting standards) and dimensional consistency.
Two variants are pore-free die casting, which is used to eliminate gas porosity defects; and direct injection die casting, which is used with zinc castings to reduce scrap and increase yield.

Advantages of die casting

Advantages:

1.Excellent dimensional accuracy (dependent on casting material, but typically 0.1 mm for the first 2.5 cm (0.005 inch for the first inch) and 0.02 mm for each additional centimeter (0.002 inch for each additional inch).

2.Smooth cast surfaces (Ra 1–2.5 micrometres or 0.04–0.10 thourms).

3.Thinner walls can be cast as compared to sand and permanent mold casting (approximately 0.75 mm or 0.030 in).

4.Inserts can be cast-in (such as threaded inserts, heating elements, and high strength bearing surfaces).

5.Reduces or eliminates secondary machining operations.

6.Rapid production rates.

7.Castingtensile strengthas high as 415 megapascals (60 ksi).

8.Casting of low fluidity metals.

What is our difference from others ?

1.Casting product have no shortage of material ,cold material,black point etc defect.

2. The critical dimensions tolerances can be controlled in the range of 2-5microns .

3.Cooperation with Listed companies--Comix commercial equipment Co.,ltd since 2008.

4.Five years of experience in production of aluminum die casting .

5.. More than a decade of experience on die casting mold manufacturing.

6.Mold to finished product is one-stop service

7.Obtained ISO9001 certification.

8.Own 650T die casting machine

Welcome to talk with me for know more