Home  >  Material Handling Equipments & Parts  >  Material Handling Equipment  >  Bridge Cranes

LX model single beam suspension motor crane and CD1 model and MD1 model electric hoist are used together as a complete set. - details see: https://www.machineto.com/lx-suspension-type-eot-crane-10196144

Detailed Product Description

EOT crane
Lx suspension type
Lifting capacity: 0.5-5ton
Span: 3- 16m
Match CD1/MD1 type hoist.

EOT Crane

Lx Suspension type

LX Single girder Suspension EOT Crane , match with CD1 and MD1 type Electric Wire rope hoist, to compose the light and small lifing equipment, which mainly use in the machine manufacture, assembling plants, storage house and tunnel etc.

The travel rail adopt I rail, with medium working duty, the popular model with 0.5t, 1t, 2t, 3t and 5t, the lifting span from 3m to 16m, working temperature -20 degree to 40 degree, operate method adopt the ground suspend handle or the remote control.

This model crane not suitable to work in the burnable and explosible medium or in places have high humidity and acid, alkali gases, nor suitable to lift and transport melted metals, poisions and burnable materials.

Electrical elements:

The crane we produced is designed to meet the requirement stated in your specification, as well as for the operation conditions. The sub-assemblies used by are standardized equipment of renowned manufactures and have been approved for specific crane operation by our test laboratory. Their characteristics regarding impact, vibrations, wear and safety were examined, a continuous high quality standard is ensured by series production and standardized sub-assemblies.

The electrical equipment is accommodated in robust steel plate control cubicles.

All movement can be switched off by actuating the emergency-off switch at the control station via a main contactor. The entire equipment is easy to install and dismantle due to the use of threaded bolts and top-hat rails. Cable inlet from the cable gland

Power supply cable and control cable along the girder.

According to the different application, the hoists can be used in combination with the explosion—proof single beam crane mode BQ and the explosion—proof single beam suspension crane mode BX.

LX Single Girder Suspension EOT Crane

Lifting capacity (ton)		0.5, 1, 2, 3		5
Span (m)		3- 16		3-16
Crane Travelling Device	Travelling speed (m/min)	20	30	20	30
	Reducer ratio	28.2	20	30.4	21.6
	Motor	ZDY21-4, 2x0.4Kw, 1380r/min		ZDY112-4, 2x0.8kw, 1380r/min
Lifting device (Electric hoist) And hoist travelling device	Electric Hoist model	CD1/ MD1
	Lifting speed (m/min)	8, 0.8/8
	Lifting height (m)	6, 9, 12, 18, 24, 30
	Travelling speed (m/min)	20; (30)
	Motor	Taper Squirrel-cage type
Work duty	Middle grade, JC=25%
Power supply	380V, 50Hz, 3-Phase
Wheel Diameter	130mm			150mm
Rail Surface width	37- 70mm

Users in the order or signed contract, must be the basic parameters of the machine (rated from the weight of hoisting height, the effective radius, etc.) clearly described in welcome to online consultation, if necessary or E-mail it to us, you will receive our prompt and careful reply!