Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Spray Drying Equipment

Spray dryer, 1. It's fast in drying, it need 5-15 seconds., 2. Operation is stable and simple, 3. Good in fluidity and solubili - details see: https://www.machineto.com/lpg-series-high-speed-centrifugal-spray-dryer-10295615

Description

The spray drying is the widest used technology in the liquid shaping technology and in the drying industry. It is most suitable for producing powder, particle, or block solid products from materials of solution, emulsion, soliquoid and pumpable paste states. Therefore, when the particle size and distribution of the final products, their residual water contents, the stocking density and the particle shape meet the precision standards, the spray drying is one of the most desired technologies.

Features

1 High speed of drying. After the spraying of he material liquid, the surface area of the material will be increased greatly. In the hot-air flow, 95%-98% of water can be evaporated at a moment. The time of completing the drying needs only several seconds.

2 It is especially suitable for drying the heat sensitive materials. It’s final products own the good uniformity, mobility, dissolving capacity. And the final products are high in purity and good in quality.

3 The production procedure is simple and the operational control is easy. The liquid with the moisture contents 40-60%(for special materials, the contents may reach 90%) can be dried into power or particle products once a time. After the drying, there is no need for smashing of sorting, so as to reduce the operation procedures in the production and enchance the purity. The product particle diamenters, looseness and water contents can be adjusted through changing the operation condition in a certain scope. It is very convenient to carry out the control and management.

Technical parameters

type		LPG
		5	25	50	100	150	200-3000
Inlet temperature		≤ 350°C
Outlet temperature		80-90°C
evaporate capacity (kg/h)		5	25	50	100	150	200-3000
driving type		compressed air drive	mechanical drive
Rotate speed		25000	22000	21500	18000	18000	15000
diameter of atomizer tray (mm)		50	120	120	120	150	180-340
heating source		electricity	electricity	electricity +steam+fuel oil+coal gas	electricity +steam	electricity +steam+fuel oil+coal gas	To be solved by users
Electric-heating power (kw)		9	45	60	81	99
Dried powder recovery rate (%)		≥ 95	≥ 95	≥ 95	≥ 95	≥ 95	≥ 95
Installation size	A(mm)	1000	1290	1730	2500	2800	according to practical needs
	B(mm)	2100	3410	4245	5300	6000
	C(mm)	2300	4260	4645	6000	6700
	φ D(mm)	1060	1800	2133	2560	2860
	E1(mm)	1050	1200	1640	2100	2180
	E2(mm)	1050	1200	1640	2100	2180
	F(mm)	750	1000	1250	1750	1970
	G(mm)	530	1700	1750	1930	2080
	H(mm)	530	1300	1800	2600	3050
	I(mm)	530	1550	1600	1780	1960

All dimensions are for reference , they are depends on raw materials .Our factory has the right to change without prior notice.